Northern Virginia Roll Call

Just have your anniversary dinner at the diner at approximately 7pm

 

Cool. If you'll take $100, I'll take them. If you want more than that, I'll have to get my wife involved... And no telling how that will go.

 

possibly the best idea I've seen on this thread since i joined!

 

Thanks. I think the ET ones are just over 1.5". I was just looking for another set to back up the ones I have for my wheels, but I have the ET ones for the Ray10s.

Edit: may be in just so I can have another key though...put me down as a possible if you get no other takers!

Edit #2: I'm an idiot...just noticed the difference in the seat of the lugs from the picture. No shit. Thanks for pointing that out @buyobuyo!

 

That's what we needed to see

 

Haha...not going down that road! Next time around for sure.

 

i wont even be there, but i half expected @boogie3478 to film it for me.

 

So.............. if it takes most of us from NOVA 2 hours to get to Richmond 4WP and another 2-3 hours to get to flagpole are we looking at wheeling more on Sunday? I'm thinking 4WP 9-11 for a few hours then lunch and beers, head out to flagpole ETA between 3-4 and then wheel or setup camp and have more beers and wheel in am? Also who plans on going as of now so we can get a decent list together?

 

Im trying to get everything ready. I should be in unless by front bearings are FUBAR. Going to check Thursday if I have time.

 

Yeah you could do that. Would just put you a little higher, probably around 2.25”

 

That is what I ran on my 2016 with no issues (Stock UCAs, 887s, OME struts/shocks, and Headstrong's AAL).

 

It wasn't that impressive. Small red lump at my hairline. What WAS impressive was the fact that the drill fell 11 feet to the floor, and survived without a noticeable scratch. Now, I'm not looking to start a tool war, but I do like Dewalt tools. (Maybe cause they are Steelers colored)

 

Funny, I think that is why I don't like them...

 

Now we are talking! Right up the street from me and I'm always down for a brewery... Adroit theory.. yum!

 

Perfect... I want to be lifted as much as possible and leveled but not need UCA's... Trying to be cheap basically because I know I am going to spend about 20k the month of Sept anyway and don't need to be immediately dumping 2k into a suspension setup on a brand new truck. Can't see that going over well with wife.

 

Might have sold my bed bars

 

Sweet.. Thanks! And I see we are basically neighbors.. I am in Haymarket. The misses and I go to Old Bust Head at least once a month when I am home. Good atmosphere and good beer!

 

Ill take the lugs if theyll fit my truck. Also what size opening is on the filter? I may want that too

 

Hey neighbor! Let me know when you do your lift, I will lend a hand. OBH is a good place with good beer; wish I made it out there more often. Have you been out to Barrel Oak in Delaplane? Good views, decent beer, and my wife enjoys the wine. We like it since we can get wine and beer in the same place.