What Have You Done To Your 3rd Gen Today?

VERY COOL!

 

Try these bulbs. This is what I put in my truck, they are a little expensive tho.

 

Thanks. Rattle can... It’s a pretty simple process.

Wire brush and scotch brite pad to remove surface rust.
File to remove some very minor slag from the welds.
M600 degreaser applied with a spray bottle (key component) followed by a self-etching primer and a few cans of Dupliclor Bed Armor.
A few more coats tomorrow and then weld on.

 

Just pull the trigger, it doesn’t look out of place and the sound is much better with the alpine compared to stock.

 

What Tacoma?

 

Just removed the skirt and put on the skid plate! Love these trucks!

 

So would you call this a 1 beer mod??? Looks easy... So you choose girls light!

 

It's a warrior rack .

 

Not being sarcastic or judgemental but why the steel plate? Just curious is all.

 

Haha! Yes, definitely a one beer job. Super easy.

 

“Raptor Lined” my skid plates, ugly chrome rear bumper covers, the front lower trim piece and sprayed the bed. In case anyone was wondering, that raptorliner stuff is super easy to spray, costs $100 on Amazon and comes with the gun, and spray!
Oh and also a 3” body lift in the front and 2” in the rear and wrapped the TRD Pro wheels in a 33x12.5” tire. Truck looks so much better without chrome imo

 

Looks great from a fellow Missourian.

 

Hey thanks brother I appreciate it! I’m jelly of the cement, wish I would’ve done my research before buying and realized that it was an available color for the TRDOR in ‘18

 

Just checking. I've seen some strange installs before and I'm sure you have too.

 

No worries about mpg unless you do a lot of high speed highway driving. Even at that I think the worst case might be 1/2 to 1 mpg. I did put on a TRD Skid plate which smooths the lower end a bit and drive 85% in town and 15% on DFW freeways (which can be worse than in town sometimes) I think my mpg has gone up. Probably due to the truck breaking in. But sans the air dam I couldn't tell the difference.

 

Tacoma tailgates are notoriously weak in the middle. The steel plates reinforce the tailgate. Plus, it does away with the horribly deep vertical ribs in the tailgate.

 

Looks great but just looked on the mobtown site and I think the plate is aluminum not steel...which is lighter so that’s a good thing

 

Anyone know how to program new tpms sensors...I know I have the correct ones...the Toyota guru I went to for my wheel/tire mount and balance/ alignment said I got the correct ones but I just didn’t want to cough up $80 for him to program them. I’ve read the owners manual and poked around online...given it a few tries but can’t seem to get them programmed. Time to ask the people I trust to help me get this done...you all. Wealth of knowledge here. Thanks in advance to anyone who can lend a hand with this one.

 

Gotcha! Thank you.

 

Details and pics of where you got and how you installed that hood ornament. Lol