Bumper Cap Issues w/ Dealer on 2017 Offroad

Where are these from?

 

Warn hidden winch front bumper $749 from eBay

Fab Fours rear bumper $799 from Bumpersuperstore.com

 

Thank you! Great looking set up you've got there.

 

Here you go

https://bumpersuperstore.com/i-2393...MI0OW_-5HZ3AIVVFmGCh1q7QT5EAQYAyABEgJsTfD_BwE

https://m.ebay.com/itm/Warn-100044-...&_from=R40&rt=nc&_trksid=p2489528.m4969.l1313

 

Yep.

 

Thanks for the update, I know I’ve already been made aware.

Never owned a 2nd Gen, but if they’re like the 1st gens it’s metal (maybe 3/16”). It looks like plastic.

 

Southern Style Off-road got my vote. Kinda pricey ($967 including light bar) but looks like the cleanest version I’ve found. Points for photoshop and cement photo:

https://www.southernstyleoffroad.com/product/2016-tacoma-slimline-hybrid-bumper-20-heise-led/

 

Correct me if I am wrong here but don't you leave the current bumper cover in place and just cut it? I would like to take the whole thing off as mine is fading as shit....

 

OPs original post was related to the lower front filler piece. The bumpers we have been discussing replace that plastic piece with a hard steel/winch mountable version.

 

I understand but I'm pretty sure that piece stays on for the SSO bumper and is just cut.

 

I just gorilla glued mine, it’s held up for over a year.

 

What areas did you put the glue?

 

I just got my tacoma back from dealership who replaced the bumper and valance under the bumper to bumper warranty. Here is a picture of the finish product

 

I put a line of glue where the yellow line is in the picture... I did this on both the driver and passenger side of the bumper. I used a bottle jack and a piece of wood to hold the bumper in place while the glue dried.

 

Thank you!

 

When I sold my Cummins Ram and got the TRD Pro, the first thing I noticed was how cheap and thin the bumpers were. The Ram had thick steel bumpers you certainly wouldn’t want to get hit by.