Alabama thread!

yessir, soon. he's going to help me do the exhuast reroute, and look at helping me with the steering spacers too. I can't get Matt to communicate real well about when he can work but @Jerneyman is....so...

customer service speaks VOLUMES to me...even if you are a friend...

 

Have him load the welder on his truck, meet at my house, as soon as we get all the walls and rafters out of my garage, you can pull your truck in a get it welded.

I figure it will be on into the afternoon/early evening. I really would like to have the osb and felt paper on the roof.

 

When?

 

that's up to him... @Jerneyman

 

The "Steering Spacer" you are referring to is just an extension on the steering stop on the spindle, correct?

 

you are correct. it will be no more than 1/2" addition to the steering stop, so that I contact the LCA just a little sooner to prevent UCA/Reservoir rubbing.

 

My setup isn’t quite mobile. At least for doing the exhaust anyway. I’ll have to use my band saw for cutting the tubing.

 

I assume that's the best way to cut it?

 

Yeah, at least with what I’ve got. It cuts pretty smooth.

 

Saturday, thinking to start around 7:30 or 8.

 

if you're starting that early I can probably swing by for a while in the morning. not meeting Wes till after lunch.

 

In the works

 

YAY! 99,900 more and you're in the big bucks!!!! I think once you get a good amount of subs then the subs start coming more frequently. 1+2=3=6=12=24 etc. etc.

I think I have 11. Eleven subs

 

yeah I'm up to 31...not really trying though, just enjoy posting for my own enjoyment.

 

Me too. If I make one person laugh, my job is done. Even if they don't subscribe.

 

my videos make me laugh, so do I count as my 1?

 

Yes. Whatever brings you joy

 

Should we start tagging Androlle until he comes back?