1st Gen Lunchtable Thread - General Discussion

That can't be right use some threadlocker if you do that lol

 

I no right ? I snapped a bolt last time my shocks were changed 4 years ago lol that’s when I’m asking

 

I just do it snog by hand. But ive heard 53ftlb and a few different numbers

 

Just because it's a 5 lug I don't see why it would be that much lower then a 6. I think for a 6 it's in the 60lb range

 

I also witness mark all my bolts on suspension parts so they're easy to check

 

I can't remember what I did mine at, but I'm 6 lug. Not sure it really matters though...I'd guess probably 60ft lbs minimum I'd imagine but should probably verify that there isn't some weird reason it's supposed to be that low or something.

 

exactly 19ft on mine too ,prerunner and 4wd are 53ftp

 

So it is 19 for 5lugs

 

Weird, 19ft lbs for 2wd and 53ft lbs for 4x4 and prerunner. Huh

 

I don't see how that can be right though, 19 is nothing

 

At 19 ft lbs I'd for sure be using blue loctite and witness marking. After the initial like 50 mile retorque

 

Well if it were me I'd do 60 and some blue threadlocker...

 

I always do mine till just snug and never had a issue. As far as ik they mounts exactly the same way as a 6lug

 

Im sure i do way more then 19 by hand and never had a issue

 

I’ll probably play it safe and do it snug by hand I’m afraid to snap a bolt again , it was a pain to find the same size
Bolt last time

 

True. For somebody without a torque wrench I'd say snug and a good two handed pull on a ratchet

 

Just weld them on, problem solved

 

Im just to lazy to pull out s tourqe wrench for shocks lol
But yeah never had a single issue with just doing it by hand