What have you done to your Tacoma today? 1st Gen Edition

I’ve never had a problem with them before so idk why they decided to get picky this one time. It was a newer younger guy this time but I was still bullshitting with the techs in the back since I knew a few of them. Oh well. They are now on and look good

 

looks good

 

Mind posting that link? Thanks.

 

Sliders turned out well also

 

Looks great!

 

I’m afraid I’m going to have to end up doing some cutting as well. The Ko2s seem to be bigger than my Kos.

One question though.

I’m assuming your older Ko2s where load E as well as BFG decided to forget about the millions of smaller size trucks running 16s. But how do your 265 load E ride compared to the 285 Es? I would think that the 265 E would be super harsh since there’s less sidewall.

 

0y

Could try fluid film or some rubber / plastic in the friction areas...

 

Cut out sway bar links with a grinder.

 

Thanks. Got some zone stuff instead. About the same price with a 3 year warranty on the rotors and a lifetime warranty on the pads. Figure a big change wouldn't happen unless doing the Tundra swap.

 

Since you have an 02 (w/ tilt column I assume), follow post 42 instead of post 1, if you have a welder you can finish the job in 30mins rather than 2-3 hrs. For 97 & older or with no tilt you have to take everything apart like in post 1.

Took me about 1.5 hrs from start to finish which included driving to 2 different welding shops. I have a cheap flux core welder that someone gave me but I'm not a welder so I just payed $10 to have it tacked. I was so happy I drove back to the welder & brought him a 6-pack for tig welding it (mig is perfectly fine) & for doing it right away.

 

I was thinking of adding nylon washers, I just don’t know how long they would last.

 

Is that Pepboys?

 

@License2Ill @JKO1998

This is what I have. Couldn't get a decent cam angle. I have led's turn signals in the rear, none in the front yet.

$10 iJDMTOY 3-Pin CF14 EP35 Electronic LED Flasher Relay As LED Related Turn Signal Bulbs Hyper Flash Fix

https://www.amazon.com/gp/product/B00XAU66V4/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

 

I got the one sperrunner mentioned. On the shelf at AutoZone. Hyper flash seems to be cured!

 

Wait, did I say something about turn signals?

 

Yeah, I know. But they share the same ground point. I'm glad it didn't turn out to be a wiring issue!

 

Maybe he meant me but i dont see how he confused that

 

I actually helped my buddy with changing his brake pads on his Ranger. And he said the dude at Vatozone said his brake pads were under a lifetime warranty. Which makes no sense, they’re essentially a wear item haha. Hopefully my Vatozone pads are under lifetime warranty too

 

I had led turn signals up until like last week, but not anymore.