What Have You Done To Your 2nd Gen Tacoma Today?

Hell yea son you know the mallz are my shit!

 

Finally installed my custom panels.

 

Looks good! How's the camera F/R mod treating you? Thinking about doing it myself.

 

1” rear block.



I’ll get better pics tomorrow, love how my trucks sits now. Hopefully in a couple of weeks, I’ll get around to installing my 1” body lift.

 

You can throw those SAE sockets away and buy metric now

Thankfully you didn’t strip that drain bolt

 

Drained a little of the coolant because the top looked a little brown, however coolant off the bottom was nice and pink. I think I had some air up top as I was getting the gurgling sound from a dead stop. When I was filling it cold I was able to burp the baby by squeezing the radiator hose with a little fluid in the funnel. With 37k I thought there was something wrong but it probably was just the air.

 

Only had it on to aim the camera so far but it should see daily use. GF lives at the bottom of a steep driveway and this will allow me to see the road surface below the hood line when I top out. Neighbor kids leave bikes & crap in the street. Seems to work as advertised though.

 

This came in today...

 

Can't say I did it. But I'm having it done!

 

I put shock world and some bs gaming shit came up when I was looking for the sliders. I thought u were trollin lol look good man

 

Installed a whole new wiring harness and 7 pin / 4 pin plug for towing . All hardwired in with triple ground !

 

Purchased some Fluid Film for my new frame !

 

Test fit a PIAA RF10


https://www.tacomaworld.com/threads/piaa-rf10-10-driving-light-bar.563054/#post-18456035

 

Changed front wheel bearing. Pain in the ass hub was rust seized ro my cv axle. I ordered a hub puller from Amazon so it will be easier next time.

 

Will that interfere with side curtain airbag deployment?

 

Each sticker adds .125" of lift!!

And there are more on the floor, un-used!

 

If that’s the way it works, which stickers add the most lift?

 

Replaced the cats with some pipe. I now have my power back!

 

How many stickers do you need to clear 33"s without trimming?

 

Yep I think I'm going this route when my plastiderped stock finally annoys me enough.