1st Gen Lunchtable Thread - General Discussion

So that's a yes for needing to adjust the preload, got it.

How do I know where to set the preload at, exactly?

 

When you like the height and it is even side to side. You'll have e to adjust rol back and forth to let it settle and adjust again, took me about 30mins to dial it in how I like it.

 

Perfect. So this is it then? I'm about to place the order. Want to have this done by next weekend.

Thanks for the help. I'm not very well versed in suspension.

Hardware I already have:

• ICON 2.5 Coilovers and 6 Toplate Bolts
• ICON Rear Shocks, No Hardware
• AllPro Standard Leafs, No Hardware
• SPC Upper Control Arms, w/ Main Bolt
• 3" Extended Rear Brake Line
• BAMF BPV Riser

 

Yea, I need to do that the "wrenches" toytec sends is crap although it's easy to adjust brand new compared to ones that are 2 years old of driving on gravel roads

 

Placed the order. Let's see if I can install this lift next weekend.

Now to find a good SVRA or trail to do a baseline in. Do you know of one that isn't on fire, @Sperrunner?

 

Holy crap it's the sign of the apocalypse lol Tyler is going to offroad

 

I'm one of the four horsemen of the apocalypse.

 

It's 4 and what's your horseman name? Pavement princess lol jk it's good to finally hear that your going to offroad

 

Just took the taco to get a late night snack. Dense air after a storm and boost played nicely, had a pull where I held 19° of advance and damn the taco was pulling hard. Did some donuts on the wet roads for fun too

 

I'm finishing up my sway bar delete at work lol. Guys don't have any cut off discs so we are using a sawzall

 

You know it unbolts right?

 

Bolts rounded off so rusty.

 

Oh right, four. Duh.

 

What kind of snack?

I'm hungry.

 

Chex-Mix and a SlimJim, easy to eat when you still have to shift like a drag racer haha

 

Well just got told by my supervisor to go change a hydraulic pump. FML guess I won’t be catching up on this thread tonight.

 

So is a snickers lol. Sway bar is off woot just need to trim the mount some more of it's done

 

Mine won't approach me anymore especially since when he told me I don't do my job cause I do the least amount of barrel treated

 

I have worked with a number of pumps in my day, hydraulic and water alike. The latest system lineup consisted simply of six hydrocoptic marzelvanes, so fitted to the ambifacient lunar waneshaft that sidefumbling was effectively prevented. The main winding was of the normal lotus o-deltoid type placed in panendermic semiboloid slots of the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdlespring on the ‘up’ end of the grammeters. Moreover, whenever fluorescence score motion is required, it may also be employed in conjunction with a drawn reciprocation dingle arm to reduce sinusoidal depleneration.

 

Look at this POS so ugly lol