Long Travel BS Thread

If no driveline vibes then I wouldn't worry too much. Most shims however are around 2*so if something is setup wrong I would fix that. Welding on new spring perches sucks but it the right thing to do. I'm around 2.5* pinion angle at ride ht and have no vibes or issues

 

Last time I saw it at full droop and yea I fixed the ubolts

 

Not the best pic but ....

 

You can see what it is yourself if you buy an angle finder.

https://www.tacomaworld.com/threads/drive-shaft-vibrations-solved-step-by-step.244535/

 

thanks

 

So I just went ahead and got the power stop brake kit again. Almost went EBC but it like almost $400 i got the power stop for $142

 

I have it. Got it for a good deal and it works pretty good.

 

What inner tie rods are you guys using ? My duralast inner tie rods are loose after only a few thousand miles....

 

You’re going to fit 2.5” and still go with the BAMF kit? I know people have made it work but it seems like a tight fit.

 

Lots of people have done it. It works, just a lil less than ideal. I’d definitely think about going archive. It’ll be the same cost to install, but leave room for upgrades in the future.

 

welp... ive gone down the rabbit hole. TT Motorsports race kit is getting built around my camburg hubs starting next week. this was a stupid idea i should have just sold my truck.

that being said my front end on my truck is for sale. i have one person in line already.

Complete camburg long travel kit with spindles

3.5+ camburg LT

Stock spindles with hubs and TC gussets

Dirt designs engine brace/bypass tower

Shocks (9/10 exterior 10/10 internals)

2.5x8” King coilovers with ebitech 600# springs

2.5x8” king double bypasses

2.0x2” king bump stops with cans

will come with spare upper uniballs and some other odds and ends.


Complete front with everything above >>$5500<<

 

Heim joint conversion...

 

Not that I have the money, but how much for the front bypasses?

 

package deal only if this guy falls through i might part out

 

Gotcha. Pm me if he does with a price on the bypasses. With they were triples, but if the deal is good enough, you may make me spend money

 

Yeah, I figure I can modify them enough to fit anyway. I'm planning on building it into a bit of a bed cage so I'll be doing some

 

If you’re gonna put more work into them, don’t waste your money. Start from scratch

 

Well the time has come. Getting my custom order placed through Headstrong for some ADS triples with the following specs:
2.5x14" Triple bypass (standard 2 comp, 1 reb.)
-Remote Reservior
-King tube style #2 with tubes facing front and reservoir hose rearward (mirrored pair for left and right).
-Welded lower rod end.
S***'s getting real.

 

Well this truck is officially 4wd and has ac

 

Siiiiiickkkkk