2011 RWD Boat ramp spun .

How do I get both rear wheel to turn , I was at the boat ramp pulling up my boat up and I spun on 2L. I notice only one wheel was turning .

Thanks

 

Weld your 3rd.

 

Data on your truck, like the year and model, would be helpful.

But this thread might help. https://www.tacomaworld.com/threads/probably-a-dumb-question-about-using-gears.255903/

 

Hit your brakes and gas. Poor mans locker.

 

Drag your brakes a bit while on the gas, will help even out power to the rear wheels. It helps when stuck in the snow anyway.

 

Lol, beat me to it

 

Rear locker.

I’m too terrified to take my Taco on a boat ramp. And I have 4WD.
I have no faith lol

 

Push this button

 

Detroit TruTrac will solve your problems

 

lightly apply your parking brake.

 

It’s at 2011 Tacoma TRD . Should I turn the LSD completely off , will that make both wheel spend. I don’t have RE Diff Lock switch only LSD switch .

 

TRD sport then.

Simply tap the Auto LSD button once, Trac and Auto LSD will light up on the dash, this will give you the best chance to use your traction control to get up the launch ramp and spin both tires.

Best thing though is to get some weight over the ass end. Have your buddy jump in the bed farthest back, and maybe a lil jumping up and down.

 

This. I had problems at the ramp until someone shared this tip with me.

Never spun a wheel since.

 

did you press and hold or one tap?

 

When I apply the parking brake lightly . Do I turn the auto LSD off

 

I hold it down for a few second .

 

Weigh on back always worked for me. get a couple or 3 guys to stand on your bumper. have them bounce if needed.

Or figure out your LSD.

 

Holding it down turns everything off. Just press it once to turn on auto LSD and lightly apply the e-brake.

What type of shape are your tires in?