Pic Request: DCLB with Rear Bumper Tire Carrier

As stated in the title, does anyone have a picture of a DCLB with a rear bumper tire carrier? Specifically looking for a side profile just to eyeball about how much length it adds. I’ve got a C4 Fab front bumper on order, and I’ll be ordering their high clearance rear bumper in the near future, just torn on whether to go with the tire carrier addition... Thanks in advance!

 

Closes pics I have, this is a custom bumper with the tyre carrier sucked
up tight i can grab another before I head to work here in a few hrs

 

Cool carrier, I like the cap too, which brand is it?

 

I measured my C4 HC: 285/70/17 tire extends 19" from tailgate. HTH

 

Thanks for the replies! This has been very helpful!

Ace, what rear suspension setup do you have to hold that all up?? Looks like you’ve got a lot of weight on the rear end... Looks perfect BTW

 

Thanks man. I have an Old Man Emu add-a-leaf and Icon stage 2 front and rear. There is a TON* of weight with a topper, awning, (2) full gas cans, tire/wheel, Hi-lift jack, Front Runner racks and an RTT. Still sitting level though!

Let me know if you need any other measurements or anything with the C4 bumpers.

*Hopefully not an actual ton.

 

Should be good to go with what you provided. Thanks again. Did you have/relocate a backup camera?... or is that even possible with the tire?

 

I did relocate the camera under the tire. I designed a custom bracket and had it cut out of 1/8" ABS to mount it to the C4 swing out. It's in a MUCH better place - I can just see the bottom of the tire and 180 degrees to each side. I thought about having the brackets cut out of steel, but the minimum order was 50, so...

Maybe I'll create a post and see if there's any interest in the bracket and I'll get them manufactured.

Bracket

Close up

Top view

 

You’re the man! I’ll definitely be referencing this in the future.