1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Baja Designs: General Discussion Thread

Discussion in 'Baja Designs' started by Baja Designs, Apr 23, 2015.

Page 76 of 215
  1. Aug 12, 2018 at 3:35 PM
    #1501
    Nitori

    #1501
    Nitori Well-Known Member

    Joined:
    May 3, 2016
    Member:
    #186058
    Messages:
    4,855
    Maricopa AZ
    Vehicle:
    2021 T4R SR5
    Yeah I figure as much based on the specs, I just wanted to make 100% sure because seeing what looks like 12 gauge on the lights kinda threw me for a loop.

    Going thru the switchpro.
     
    Nitori, Aug 12, 2018
    #1501
    TACOVRD[QUOTED] likes this.
  2. Aug 12, 2018 at 3:45 PM
    #1502
    TACOVRD

    #1502
    TACOVRD I Identify As A Prius

    Joined:
    Jul 11, 2015
    Member:
    #159264
    Messages:
    6,437
    Gender:
    Male
    First Name:
    TW Addict
    AZ/WA
    Vehicle:
    2019 T4R ORP - Formerly 2013 DCSB OR Spruce Mica
    Workin' on it....
    Each of those switches on a SwitchPro (at least 8100) is rated at 18 amps each and 30 amps if you combine 4 & 8.
     
    TACOVRD, Aug 12, 2018
    #1502
  3. Aug 12, 2018 at 3:51 PM
    #1503
    Nitori

    #1503
    Nitori Well-Known Member

    Joined:
    May 3, 2016
    Member:
    #186058
    Messages:
    4,855
    Maricopa AZ
    Vehicle:
    2021 T4R SR5
    OK so I should be good on power, now I just need to confirm gauge...

    Lemme go grab my calipers.
     
    Nitori, Aug 12, 2018
    #1503
  4. Aug 12, 2018 at 3:56 PM
    #1504
    Nitori

    #1504
    Nitori Well-Known Member

    Joined:
    May 3, 2016
    Member:
    #186058
    Messages:
    4,855
    Maricopa AZ
    Vehicle:
    2021 T4R SR5
    Yep, 12 gauge. OK, now I know what connectors I need to buy. :)
     
    Nitori, Aug 12, 2018
    #1504
    TACOVRD likes this.
  5. Aug 12, 2018 at 6:28 PM
    #1505
    Baja Designs

    #1505
    Baja Designs [OP] The Scientist of Lighting Vendor

    Joined:
    Jan 8, 2015
    Member:
    #145889
    Messages:
    2,936
    Gender:
    Male
    San Marcos, CA
    Glad you figured it out. Our XL, OnX6, S8, and LP9 Series use 12 gauge wiring. Squadron and S2 use 16 gauge.

    Baja Designs
    www.bajadesigns.com
     
    Baja Designs, Aug 12, 2018
    #1505
    Nitori[QUOTED] likes this.
  6. Aug 13, 2018 at 11:56 AM
    #1506
    Baja Designs

    #1506
    Baja Designs [OP] The Scientist of Lighting Vendor

    Joined:
    Jan 8, 2015
    Member:
    #145889
    Messages:
    2,936
    Gender:
    Male
    San Marcos, CA
    Baja Designs, Aug 13, 2018
    #1506
    Willbeck, K_Matthews13 and ETXTacoma like this.
  7. Aug 13, 2018 at 11:57 AM
    #1507
    StOrMyThEtAcO

    #1507
    StOrMyThEtAcO @stormythetaco

    Joined:
    Mar 23, 2015
    Member:
    #151561
    Messages:
    7,411
    Gender:
    Male
    First Name:
    Cody
    CO
    Vehicle:
    18 TRD Sport mom bus
    All of them
    I wish I had more money's :(
     
    StOrMyThEtAcO, Aug 13, 2018
    #1507
    ETXTacoma likes this.
  8. Aug 13, 2018 at 11:58 AM
    #1508
    ETXTacoma

    #1508
    ETXTacoma Someone gave me a plasma cutter.

    Joined:
    Feb 12, 2016
    Member:
    #177942
    Messages:
    16,302
    Gender:
    Male
    First Name:
    Steven
    Tyler, Texas
    Vehicle:
    2014 DCSB Tacoma TRD OR
    Dynatrac ProRock 60 Rear Axle, that is important enough.
    Don't we all.
     
    ETXTacoma, Aug 13, 2018
    #1508
    Gunshot-6A and StOrMyThEtAcO[QUOTED] like this.
  9. Aug 13, 2018 at 6:42 PM
    #1509
    Nitori

    #1509
    Nitori Well-Known Member

    Joined:
    May 3, 2016
    Member:
    #186058
    Messages:
    4,855
    Maricopa AZ
    Vehicle:
    2021 T4R SR5
    Nitori, Aug 13, 2018
    #1509
  10. Aug 13, 2018 at 7:05 PM
    #1510
    StOrMyThEtAcO

    #1510
    StOrMyThEtAcO @stormythetaco

    Joined:
    Mar 23, 2015
    Member:
    #151561
    Messages:
    7,411
    Gender:
    Male
    First Name:
    Cody
    CO
    Vehicle:
    18 TRD Sport mom bus
    All of them
    Kustom
     
    StOrMyThEtAcO, Aug 13, 2018
    #1510
    ETXTacoma likes this.
  11. Aug 13, 2018 at 7:38 PM
    #1511
    Rextinkleton93

    #1511
    Rextinkleton93 Well-Known Member

    Joined:
    Aug 6, 2013
    Member:
    #109923
    Messages:
    4,411
    Gender:
    Male
    First Name:
    Kyle
    Phoenix, AZ
    Vehicle:
    2018 Superwhite Tundra Crewmax 4x4
    SMP fab built it.

























    Don’t think about it @Nitori
     
    Rextinkleton93, Aug 13, 2018
    #1511
    T-rev, ETXTacoma, Nitori[QUOTED] and 2 others like this.
  12. Aug 21, 2018 at 4:13 PM
    #1512
    Baja Designs

    #1512
    Baja Designs [OP] The Scientist of Lighting Vendor

    Joined:
    Jan 8, 2015
    Member:
    #145889
    Messages:
    2,936
    Gender:
    Male
    San Marcos, CA
    Baja Designs, Aug 21, 2018
    #1512
    Willbeck, K_Matthews13, ETXTacoma and 1 other person like this.
  13. Aug 24, 2018 at 9:01 AM
    #1513
    TRDProBuddy

    #1513
    TRDProBuddy Well-Known Member

    Joined:
    Jul 11, 2015
    Member:
    #159220
    Messages:
    511
    Gender:
    Male
    MD (Kent Island)
    Vehicle:
    2015 TRD Pro (Inferno)
    Morning Bailey,

    I recently purchased the S2 Pro, Pair, LED Wide Cornering, Flush, Backup Kit (SKU#: 487807) for my new bumper and had a question about the wiring harness. The directions that come with it mentions like yellows wires and sorts which the harness I received do not have, which is no big deal, i can figure it out. But I have a 3 weather pack connectors on this harness. The 2 at the end of the harness plug into each light, but there is another one towards the front that is like 12" long that comes right off the relay. What is that one for? I have attached a couple of picks.

    Also, I was going to wire it to separate switch inside the cab, but was wondering if I could just wire it directly to my reverse lights via the trailer plug if I just tap into that harness? Would that be acceptable to do and not use any of that harness supplied with the lights?

    Thx in advance

    Capture2.jpg

    Capture1.jpg
     
    TRDProBuddy, Aug 24, 2018
    #1513
  14. Aug 24, 2018 at 9:05 AM
    #1514
    Baja Designs

    #1514
    Baja Designs [OP] The Scientist of Lighting Vendor

    Joined:
    Jan 8, 2015
    Member:
    #145889
    Messages:
    2,936
    Gender:
    Male
    San Marcos, CA
    Good morning!

    The connector near the relay is another positive lead. You can use it for another accessory or leave unplugged.
    We wouldn't recommend tapping into the trailer wiring unless you use the relay. Instead of a switch you can use the reverse light wires as the trigger.

    Baja Designs
    www.bajadesigns.com
     
    Baja Designs, Aug 24, 2018
    #1514
  15. Aug 24, 2018 at 9:08 AM
    #1515
    Gunshot-6A

    #1515
    Gunshot-6A Prime Beef

    Joined:
    Dec 29, 2009
    Member:
    #28389
    Messages:
    23,559
    Gender:
    Male
    First Name:
    Conner
    Everett, WA
    Vehicle:
    '15 TRDOR / '17 Africa Twin
    Gunshot-6A, Aug 24, 2018
    #1515
    Willbeck likes this.
  16. Aug 24, 2018 at 9:26 AM
    #1516
    TRDProBuddy

    #1516
    TRDProBuddy Well-Known Member

    Joined:
    Jul 11, 2015
    Member:
    #159220
    Messages:
    511
    Gender:
    Male
    MD (Kent Island)
    Vehicle:
    2015 TRD Pro (Inferno)

    Thanks for the info. I will run it to a separate switch. I will just cap off the 3rd plug
     
    TRDProBuddy, Aug 24, 2018
    #1516
  17. Aug 24, 2018 at 11:02 AM
    #1517
    Baja Designs

    #1517
    Baja Designs [OP] The Scientist of Lighting Vendor

    Joined:
    Jan 8, 2015
    Member:
    #145889
    Messages:
    2,936
    Gender:
    Male
    San Marcos, CA
    :rofl:
     
    Baja Designs, Aug 24, 2018
    #1517
    Gunshot-6A[QUOTED] likes this.
  18. Aug 26, 2018 at 8:05 PM
    #1518
    Nitori

    #1518
    Nitori Well-Known Member

    Joined:
    May 3, 2016
    Member:
    #186058
    Messages:
    4,855
    Maricopa AZ
    Vehicle:
    2021 T4R SR5
    I finally got around to mounting up my lights and realized I'm now equipped with the sampler platter of Baja pods: S2 Sport wide cornering on the ditch light mounts, Squadron Sport Amber combos up front, and XL Sport Spots dead center.

    [​IMG]

    At this point I'm not sure if I should try to squeeze that extra set of squadrons in, or roll with it as is. Outboard of the ambers the bar starts to follow the bumper line before the grille does so I have very close clearance...

    Also Baja, dammit why did you change the thread pitch on the XL fasteners? Here I am with my stock of snake-bite M6 security bolts that work on my S2 and Squadrons and I realize you've up and switched to 1/4-20 bolts! :annoyed:
    Gonna watch my truck like a hawk until those come in!
     
    Nitori, Aug 26, 2018
    #1518
    BVita, Baja Designs[OP], Rome604 and 1 other person like this.
  19. Aug 27, 2018 at 10:28 AM
    #1519
    Gunshot-6A

    #1519
    Gunshot-6A Prime Beef

    Joined:
    Dec 29, 2009
    Member:
    #28389
    Messages:
    23,559
    Gender:
    Male
    First Name:
    Conner
    Everett, WA
    Vehicle:
    '15 TRDOR / '17 Africa Twin
    Do it :anonymous:
     
    Gunshot-6A, Aug 27, 2018
    #1519
  20. Aug 27, 2018 at 10:50 AM
    #1520
    Rome604

    #1520
    Rome604 I am the Captain now

    Joined:
    Feb 23, 2017
    Member:
    #211478
    Messages:
    4,615
    Gender:
    Male
    First Name:
    Dave
    Alexandria, VA
    Vehicle:
    2023 TRD Pro Sequoia

    Go big!!! Put some LP9s in the middle!!!!

    BajaLightsedited.jpg
     
    Rome604, Aug 27, 2018
    #1520
    Coot83, TACOVRD, Baja Designs[OP] and 1 other person like this.
Page 76 of 215

Products Discussed in

Switch Pros SP-9100 8-Switch Panel Power System With Concealed Mounting Hardware
$659.00
DaSen Front Bumper 6x12" Universal License Plate Holder Mounting Bracket Compatible with Off-Road LED Light Pod Compatible with Jeep Most ATV Truck Pickup
$30.99
Horizontal Bolt and Nut Gauge / Thread Checker (Inch & Metric)
$39.95
MUYI 10 Kit 2 Pin Waterproof Connector for 20-14 AWG Wire Harness 2.5mm Series Automotive Electrical Plugs with Replacement Terminal Pins Sockets and Spudger
$8.99
Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 3/8"-16 - Qty 1
$20.00
Delphi Packard Weatherpack Terminal Release Tool
$5.95
MICTUNING Backlit Led Light Bar Symbol Push Button with Wiring Kit On-off Switch Replacement for Toyota (White, Surface Size 1.54 x 0.83"es) - M0810-T-LLBW
$16.80
JR Products 12275 Black Dimmer On/Off Switch with Bezel
$45.61
iCrimp Weather Pack Crimper Tools for Delphi APTIV Packard Weather Pack Terminals Metri-Pack Connectors for Sealed Terminals
$18.89
JACO Lightning S2-Series Tire Air Chuck - 1/4" F-NPT (Open Flow) (2-Pack)
$27.99
CH4X4 Push Switch for Toyota Tacoma, FJ Cruiser, Land Cruiser, Fortuner, Hilux, 4Runner, Prado 12V 3Amp - Fog Lights Symbol - Amber LED
$23.98
To Top