Does anyone swapped the halogen turn signal for the LED no hyper flashing ones?

I ordered this turn signals and supposed doesn’t hyper flashing, does anyone swapped it on the Tacoma, I’ll get them on Monday, can’t wait to install them

 

Never heard of them with the resistor built in but sounds like a better idea than what I did. I have the regular led ones with the led flasher relay swap so now if I want to switch back I have to stick with led or swap the relay again.

 

I used to have a 2009 Honda Odyssey and I installed the resistors and was working just fine but I was worried because it get pretty hot, seem like this bulbs are pretty good and good price, hopefully works like they say, I’ll let you know when I install them, thanks

 

Depends on the flasher unit you got. Good ones are time based and will work with any bulb regardless of resistance.

 

i have these ones

SIRIUSLED 7440 Anti Hyper Flash Built-in load resistor True 25W Yellow Orange Extremely Bright LED Bulb for Turn Signal only 7440A T20 W21W Pack of 2 (Upgrade Version)

SiriusLED 7440 Anti Hyper Flash Built-in load resistor True 25W Yellow Orange Extremely Bright LED Bulb for Turn Signal only 7440A T20 W21W Pack of 2 (Upgrade Version)

same thing but not the same bulb, "non hyperflash" type bulbs. they are true to the non hyperflash. but from what ive read, in long continual use and high heats you will get hyperflash. luckily i havent experienced it, even being in az. ive only had it for a month.

i originally swapped out the stock halogen bulbs to a chrome amber bulb. i didnt like the "egg yolk" from the stock bulb in the housing. the chrome bulb looked nice but the light output SUCKED!! so then i swapped to the leds i posted above. night and day difference. i still dont have the "egg yolk" look and the light output is light years better (no pun intended), best of both worlds.

 

I used some XP80 LEDs for my turn signals from Diode Dynamics. Did both the front and rear turn signals and have no hyperblink issues and theyre really bright