What Have You Done To Your 2nd Gen Tacoma Today?

https://www.lowes.com/pd/Reflectix-33-3-sq-ft-Reflective-Roll-Insulation-16-in-W-x-25-ft-L/1014123

https://www.lowes.com/pd/Reflectix-2-in-x-30-ft-Reflective-Insulation-Tape/3012014

I doubled them up and used this tape all along the edge

 

Thank you !

 

I thought the satoshi was the flat bar grill? And that was the mesh style.

 

I’m not 100% sure if a Satoshi has to be with the flat bar. My understanding was a Satoshi was replacing the original grille with a mesh style metal. But I could be wrong.

 

Replaced the drivers side lower control arm. Had a clunk that was indicative of a bad bushing. No more clunk after replacing. Need an alignment.

 

What year 3rd gen did it come from, and what year 2nd did it go I to

 

I always called the flat bar style a billet grille. And the Satoshi grilles are usually some sort of mesh.

 

Nice tranny

 

I want to as well. Have one new caliper, other is old so it would be decently easy to paint. Wouldn't do the drums though

 

Always leave mine in for those pesky tailgaters

 

They disassemble the entire truck and document it. How much more detail do you need?

 

Did some more sound deadening. Did the bare minimum compared to others, but my gosh what a difference! No pictures of the front doors, my bad. But did the door cards and wire management today.

 

Installed my RAM mounts last week that I got from lostsheep. Tonight I got the RAM parts and setup the phone and iPad to the GPS puck.
Awesome brackets!

 

Took the front end apart to clean and replace the headlights with the tacomabeast set up.
Seems nice so far we'll see thought.

 

Well either way it looks sweet

 

SupriSurp no one makes a 3d printed adapter kit

 

Take a roll of tissue with you this year.

 

I’ll supply two boxes of Kleenex

 

Well it won't surprise me, thats for sure. BUT ! If it goes south on you.

 

Are these still AvailBle or was this a private sale I haven’t been able to find these mounts