TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Thanks! This probably helps alot, since i have not re-attempted

And I probably need to take the bracket off to replace the Serpentine belt too?

 

random note for @12TRDTacoma

would you be able to ref. the additional tensioner pulley people are adding just below the actually S/C pulley? I went to page 1 and didnt see if referenced. Im gonna start digging through the thread to find it but I was just curious; may help someone down the road.

(BTW, that first post is quite thorough and handy, good job)

 

post 2353 has it

https://www.tacomaworld.com/threads...tricks-and-mods.518932/page-118#post-17497655

 

so I ordered a black and red URD sticker back in like june, and they finally came in the other day. I got 2 white, 1 red, 1 black when I got the s/c and fuel pump stuff way back.

so the question is...do I even put them on; do I do red or black? I really like the look of the red on MGM in the above pic...but do I like it enough to do to my truck. Also the fiberglass has slightly different lines so the position wont be the exact same. The other fact is, all my badges, hood scoop sticker AND rear TRD Sport sticker are all black. all my interior accents (light switch LEDs, gear shifter bolts, dome light, etc) are red. I like the red/mgm/black look all together. but would the red look bad since my badges are all black?

 

They dont go with your lighted mirrors. We should trade

 

Or you could put the red on and put the black on top of the red offsetting the sticker at a 45° angle of your choice 1/16 to 1/8" so it would be mostly black but would have a small red outline.
Or, URD in black And the words underneath in red.

 

Green looks cool. What kind is that?

 

Yes you will need to remove your tensioner off to remove and replace your serpentine belt unfortunately. No problem! Let us know if you need help with anything else!

Post 2353 as mentioned by @Skootter14

It is a Gates Fleetrunner belt. It's supposed to last much longer over standard designs as it is made for diesel and industrial applications. It seems grippier over standard belt designs as well.

I am running a custom length (that I spent at least half a day attempting to size and locate) that you guys should not run on yours as it is too short even for 2.5 setups.

During the search process I attempted to source a size proper for 2.5's (69.5") and even stock size (70.5") as well as in between for 2.7 or 2.8 guys (70") and found no similar sizing available unfortunately.

 

I have lighted mirrors?!?!?!?

Haha

 

The highly coveted tun signal equipped mirror. Excellent at repelling tree limbs, and pedestrians.

 

.......send the red one to me.....

 

Haha

 

In all honesty though, it sounds like you don’t like the red enough to put it on your truck.....

 

I think you may be over thinking this lol

 

Very true haha. AND it has nothing to do with a S/C.....my bad

 

....I’ve been pretty bored if you can’t tell lol

 

URD sells Superchargers

 

Shouldn't huh? In that case, I'll take two.

 

This post excludes you of course. As you are highly HIGHLY modified.