dirty deeds' deeds, done dirt CHEAP! and dirty vibes

Just my .02 but I'm from Fl. Atturo makes a inexpensive mud terrain if your looking for just a spare. I have a locker in my truck so no need to buy one. I still don't have a winch but I have a strap hi-lift and shovel which I could pretty much get out of any scenario where I live,

 

That pillow doesn't look very soft

 

Buy me second vehicle?

 

Hard to find a 255/85 r16 tire. There are only about 6 or 7 makers that offer that size option.
I don't have a locker from factory, so I need one.
Winches are almost as handy as wenches. Need one of those too.
I've also got a Hi Lift Extreme. Watched a view videos of using it for recovery. Looks dangerous af in my mind when I imagine using it in that way after feeling the force needed to lift and lower the truck using it. Straps, shackles, ax, and shovel are always in the truck bed.

 

The notion that a turbo would ever start making power before a supercharger is really mechanically confusing to me, because the SC is driven by your crank. The SC literally cannot be idle if your engine is running. The amount of power might be lower, sure, that makes sense, but a turbo making power sooner just doesn't seem possible to me, so I'm clearly missing something.

 

I'm no scientist, either. Just regurgitating what I read.

 

Turbo also isn't five fucking thousand damn dollars, too.

EDIT: and the URD system isn't a crank-driven SC

 

Thanks man but cant take full credit fotr it I copied it from jberry813 I think. I like your rig btw.

 

Great jberry got tagged now I have to stop doing banworthy things in deeds' build thread...

 

I wasnt sure if they made in a 255 or not. A hi-lift can be deadly. I make sure its in good working order before I take it on the trail. So if you go the route of the winch than does that purchase include a new bumper. If you get a new bumper than you might need new coil overs if you get coil overs than you might need new UCA's.

 

Yeah on second note I changed the tag

 

I have all those things




Finger not for you, or anyone. I just think it's a hilarious pic. Shows me trying to do fun shit in my truck that I was 80% sure I was gonna get stuck on anyway. But still wanted to do it, because FUN SHIT IS FUN


Oops! Pic credit to @Breezy
I was actually flipping him off because I saw the camera shoved out the passenger window of @presta24's truck

 

Nope!

 

Doing stuff you don't know if you can make isn't fourwheeling Deeds. Haven't you learned this yet.

 

HA ha no harm no foul Edit : The bumper looks good Its from Ebay right?

 

I've had lift stuff for a while now, just learning I want better stuff at this point.

 

In the same boat wanna do shackle flip with 14" in the rear and 2.5 coil over up front. I need to pay off some bills before i put more money into Ol betty

 

Man look at those KM2s articulating right over that ground Too bad only 2 of them are on the ground

 

That moment is a good reason for my purchase of the mid skid. And another time at Rush when I hit my crossmember pretty solid.

 

Not unusual at all depending on the turbo size. A blower’s boost is directly correlated to RPM, so at low RPM there is minimal boost compared to higher RPM when you are hitting max boost of 5-7 psi. Hang a small 5-7psi turbo, and you can hit max boost quicker than you can a SC.

There’s some technical bits I’m leaving out about parasitic drag/heat soak on different sized SC’s and wastegates/blowoff valves but that’s the gist of how a turbo can boost sooner than an SC