TACO GARAGE - Dashtop Multi Mount (DMM) CLEAN and SOLID Tacoma accessory mounting

The Dashtop Multi-Mount (DMM) ®


—————————————————​

The DMM is a solution to a problem that most of us now face in one way or another. We all have one or more accesories that we would like to keep handy or in line of sight when driving our tacos on or off road, but there's nowhere to mount anything on the Taco from the factory so after trying all the common solutions, I decided to make my own. The DMM gives users 6 SOLID mounting locations for anything you want to bolt to your dash. Most common use is a universal 1" ball mount which can then be used to mount basically an unlimited variety of accesories to the dash of your Taco.
The DMM easily bolts into your Taco's dashboard behind the trim that surrounds the center screen, it remains hidden (completely hidden!) until you mount something to it, and when you do want to mount something, a phone, tablet, switch box, CB, etc, all you do is put a screw on it.The DMM is position so that you can easily have a device like a phone mounted in such a way that it will NOT obstruct your forward visibility, your infotainment screen, buttons or A/C vents. AND if that wasn't practical enough it is also not an ugly mayan pyramid sitting right in front of your face, the DMM maintains a stock look while giving you all the practicality of a multi point mounting system.

I personally use it for mounting my phone and tablet but that is only the beginning... many accessories and gadgets can made and/or adapted to work with this mount.
The DMM is RAM compatible and any other accesories that use 1" or 25mm ball mounts will work fine. As far as connectivity, cables can be ran through the DMM thanks to 2 notches along the back of it that will allow you to connect any device mounted to the DMM without having cables dangling in front.
Installation instructions can be found HERE

The mounting system starts at $62.95 (after TW discount, using code TW10)

The DMM is offered in a couple basic configurations or can be bought alone and customized by buying parts separately. The basic combos available from the DMM page are a combination of the basic kit and a form of complete mounting system, either a clamp style holder:
Slim Grip, for all phones or small tablets.
or our newly introduced Mighty Magnets:
Mighty Magnet, 2.5" diameter super strong, off-road-worthy magnet, great for phones, good with small tablets.
Mega Mighty Magnet, 3.5" dia even stronger, off-road-worthy magnet, you can off road a 12.9" ipad on this magnet (at your own risk, though)​

 

Good stuff sir.

 

PICTURES!!!
I’m going to start using this post as a picture mega thread, thanks to all of you for buying from thetacogarage.com and sharing your set-ups!
@jmneill


@Blucuss


@rdpoe
@Pyrotech

@tacothyme

@jptheriot

@runmc

@hcenteno21

@HP11

@2BigTaco

@C41n

@Rahjer


@gfunk1127

​

 

Was wondering when this would show up again.

What does install entail?

 

Click for installation instructions, you can see how it works.

 

Nice!

 

your GIF....

 

@FreshMexicanTaco
Are any available to order now ?

 

I went to the ordering page but there was no way to add it to the cart?

 

Click the top left icon. Then click “shop” you’ll see it there

 

Yes they everything on the site except for the grill is currently available, they will ship Tuesday. If ordered before then, if you didn’t see a link it’s probably because you weren’t on the “shop” section of the DMM. I’m making that adjustment to the site soon but here, you can also click this link

 

Ordered one!

 

Got the pmt thanks I'll ship that out Tuesday, most likely delivered by the end of the week

 

This thing is awesome, I highly recommend it!

See here / below for my review, installation, and photos

 

I highly recommend anyone thinking about buying to look at @pwalnut 's post about it. He did a great job showing the build process.

 

ALL DMM ORDERS PLACED ON OR BEFORE MONDAY 9/3 HAVE BEEN SHIPPED OUT. MOST, IF NOT ALL, SHOULD BE DELIVERED THIS WEEK.

 

I installed mine today. Took me about 40 minutes. I would suggest chasing the threads on the allen head bolts first, but otherwise a straightforward easy job. Thanks for shipping fast.

 

Wow. Installed this afternoon. This sucker is solid!