1st Gen Lunchtable Thread - General Discussion

What phone? I usually upload mine to Google Drive for simplicity sake.

 

iphone, I’ll try it in a minute after I eat

 

I have my own website. I bought the domain through GoDaddy, and I pay for hosting through cPanel. I pay about $14.99 every two years for the domain, and $24.00 every year for hosting.

I use WordPress to actually create the website. This method is FAR cheaper than using SquareSpace or another subscription service.

 

Why would you take that beautiful piece of Engineering that Total Chaos made and disgrace it with a ball joint spacer?

 

If your tearing the UBJ but not CV's your doing something wrong. Usually if one is good so is the other and vice-versa. By putting a BJ spacer, your adding a new stress point and something new to break.
Whats your lift setup? Bite the bullet and grab some JBA or SPC upper control arms.

For example, when I incorrectly installed my lift the first go-round this was the result:
No, I did not drive on that, I simply dropped my 5100's down 2 notches. But see that both my CV and UBJ boots are pinched here.

 

For bulk iPhone photo uploads, I just use Apple Photos. I plug in the lightning to my computer and upload away.

This is how many photos I have stored locally on my phone.

 

The rubber is probably dry and old then, that’s why they tore

 

You shouldn’t be doing tht regardless unless you have way to much lift

 

Pls help

I’m going to get goddamn scurvy

 

And if thats such a issue just limit strap the suspension so it doesn’t flex that low

 

Dibs on the truck if you die

 

Didn't say which one

Congrats on your new 5-lug.

 

Thas the one i wanted

 

Really? You'd rather have that POS than my PreRunner?

 

Will be a safer and cooler option then getting custom bj spacers

 

I need to build that frame somehow

 

If you dont want preload, ditch the top plate spacer, drop those 5100's to zero, and install some quality coils like OME 880 or 881's. All issue will be solved, and it will ride awesome. Heres mine with 880's:
CV's have a slight pitch, ball joints appear at a stock angle. No complaints what so ever.

Also, that spacer is a stress point. I look at it from a machinist perspective. What cheap Chinese recycled Iphone is that thing cast from? This is the UBJ were talking about here. If that fails, your donezo, loss of control etc... Could even total your rig.

 

You realize my PreRunner is a 6-Lug with 4x4 suspension, right?

 

But the 5lug has a v6

 

How big of a spacer