What Have You Done To Your 3rd Gen Today?

https://outerlimitsupply.com/ a really cool mount its a quick release.

 

Aww damn! If I lived closer I’d snatch them
up in a heart beat. I live down near El Paso, TX.

 

Installed two of three BAMF Skids and ditched the OME shocks for 5100’s to gain some height after the 240lbs of skids brought the nose down ‍ OME B-51’s soon....

 

Nice! Are you going to do the exhaust reroute?

 

Oh yeah, for sure... reason I just installed the first two

 

I printed out the form and took it...made an appointment but was told 45mins to an hour...going this Friday...can’t wait

 

I felt the same way when I crossed over 50k yesterday and saw it at 50002.

 

Why don't you have your plate bracket mod you sell on your own truck ???

 

That was old picture. This is current.

 

Finished up my fridge slide for my truck... ARB 37. If my calculations are correct will still clear my Ridgelander bed cover.. unit will hold my tools other cargo behind fridge... now for the install

 

265/70-17, and totally stock suspension. Great combo.

 

I got around to installing a front camera with a bracket I printed in PETG.






The rear bracket is good for mounting other stuff too.

 

Please post materials used, build info, etc. I'm looking to do the same thing and it's hard to tell how much height is lost with factory made slides.

 

Is that the CaliRaised bracket? I need to mount a buggy whip on my truck and have been playing with hitch receiver mounts that are offset so that I can swap with the FJ, and a window bracket that requires me to set it in and out when I am on the highway and to the right-of-way. The bracket needs to be strong enough to take some spring force from the flag mount.

This is essentially what is going on the truck. Doesn't matter about lights, it's the spring that concerns me and stressing the bed mounts.

https://www.acklandsgrainger.com/en/product/SUPERWHIP-8FT-WH-LED-FLR12-FLG-SPG/p/CSFSW8W

Thoughts on how stable it is? The install video from Cali doesn't show the mounting point very well.

 

Added flags

 

Nice!! If you ever decide to change out the flag, Tactilian has some awesome magnet ones. They do not leave any residue and easily removable to position it to different spots of the truck. They also have coupon codes that can be use when you sign up. https://carflagmagnet.com/

 

I used these drawer slides Firgelli Automations 32" Inch Guide Rail - 400lbs Capacity

$48 Firgelli Automations 32" Guide Rail 400lbs Capacity

https://www.amazon.com/dp/B00GP28IOC/ref=cm_sw_r_cp_tai_WewJBbEXRA1EA

And this is what is used for the tray I used 3/16 x1.5 aluminum angle x4 feet

I used 3/16 revits thtoughout entire project... I attached the tray with 1.5in aluminum angle to support the fridge weight. I am attaching to 3/4 inch wood floor I’m about to build. That way i dont have to drill bunch of holes in the bed... along with ctek charger.. solar and 105 amp hour battery... should be more than enough power to keep this and all my things running

 

It is the cheap little mods that make a difference..............Paper towel holder

 

Looks much better without it.............