South Carolina BS thread under new MANAGEMENT and lives in SC

Hmmmm

 

Idk about cutting my bed...

 

Yes and no. The grill on the 12-15s sticks out further than the 05-11s. There are 2 little triangular tabs that follow the lines of the 12-15 right where the headlight and grill meet that isn't on the 05-11. It will bolt up though if you can deal with the cosmetic differences. Not sure if there will be any interference with the triangular tabs though.

 

Might have to beat that pinch weld some with that size and a cmc is highly recommended. If you got an angle grinder and some cut off discs you can do the cmc yourself and just run it open until you can get it welded up

 

It will fit. But will have a bigger gap in between the front of the truck and bumper. Plus will have the triangle pieces in front of the grille

 

Who need a bedrack?

 

That is the plan. I might be able to get by for a few weeks without it though. I was planning on doing the CMC saturday, but IDK if I will have tires mounted by then for a trip.

How much do you rub without a CMC and your 285 duratracs?

 

I didn’t rub at all with a proper alignment but still did cmc.

 

Same here

 

I have my caster at 3.5.

 

It is satisfying to peel an orange in one spiral strip and without making a mess when pulling each wedge apart.

 

You’re a machine cranking out all those goodies!

 

This for today's randomness.

 

Before the new frame and a good alignment barely at all at full stuff and wheel turned. After frame and shitty alignment all the time. But it does no more damage to the tires than I do on the rocks.

 

Damn thats a lot of goodies!

 

Ok. Guess I’ll just pass.

 

I wonder if you could put something like weather stripping in there to fill the gap?

 

Don't think that would look to good plus it'll still have the triangle pieces the 05-11 don't need.