What Have You Done To Your 3rd Gen Today?

Looking GOOD! I love the Limited wheels...

 

********* system installed and tuned. SO MUCH LOUD

 

How much do you like the premium & tech features ?

Well stated.

Sounds great.

Looking forward to seeing this gong onto your truck.

 

That’s where I put mine. Was way easier than routing next to gas fill tube

 

I would take that deal in a minute. I've had many vehicles with sunroofs or moonroofs, and quite frankly, rarely if ever used them...too noisy plus another opportunity for something to break. Same for heated seats. Dual air controls sound nice, but again rarely used by my wife/passengers. Easy enough to redirect a vent.

When I purchased my '18 I purposely looked for one without the premium package, but with the tech package as the BSM and TSS are great safety features. YMMV. . .hope this helps.

 

I have a '18 with just the tech package and it's great. I do not regret not getting the premium one bit - I'd never use the dual zone/heated seats and the moon roof is always closed...

 

Found them at Local Costco - SCOSCHE Part number - CPMDOHM < www.scosche.com > Magic Mount Pro

 

Christmas in September!

 

Thanks Greg, I'm pretty stoked. I know it's not going to add a lot of lift, but, it is a really stout system. I wanted something tough without breaking the bank.

 

I'm going to follow your build pretty closely, as I have been thinking of doing this exact same setup.

 

Well Dean, there were a couple factors that pushed me in this direction. I honestly don't think anyone with a Sport can go wrong replacing the Hitachi's with anything stronger. I am just trying to cover as many bases as possible with this broader spectrum system, all the while staying under $2k

The 5110s and 888 coils would have probably provided another .5" of lift for sure. Maybe .75". My main objective though was durability and strength. If you compare the specs you'll see how the 6112s are definitely beefier.

60mm Piston vs 46mm Piston
2.65" Body vs 1.95"
18mm shaft vs 14mm shaft

It's not a lot but it is more.

I'm most likely a lot harder on my things than most people though. So the added strength won over maximum height for me.

 

Sensitive much?

Sorry I hurt your feels bro!

 

Case and point...like a crying baby...lmfao.

 

No question they look sweet...my sticking point is the ~37mm scrub radius increase per side over stock.

 

Whatever you have to tell yourself sweet cheeks!

 

Sounds great.

I personally don't have need for much lift....if any.

A little beefier set up sounds really nice. I like where you are headed with this.

 

Lmfao

 

That's great, Rob!!! I'm so super excited for you and definitely can't wait for pics and impressions. And great choice in components...I've been thinking about something similar (for when ever I actually do the suspension).

Are you going to install it all yourself?

 

Driving myself bananas with this. I've been looking and looking, but cannot find what I am searching for. I've searched the forum and online. I would appreciate good guidance. I want to blackout my stock headlamps and taillights. I would prefer to just leave the stock bulbs in, but blackout/spray paint the chrome plastic on the interior. Also, I want to either blackout/spray over the yellow reflector, or replace it with a silver version (found them online). Is there anyone RELIABLE and TIMELY on the forum or a known manufacturer that can do this mod? I don't want to do it myself because 1) it looks like a real bitch and 2) if I screw it up I will be PISSED at myself. Lack of available time and patience are also issues for me. I would be willing to either purchase a plug and play set, or send mine in to be modded.


Thanks for any info!


Phil

 

Thank you!!