AZ Classifieds

Seabass · Sep 6, 2018

azshooter40 said: ↑

So much want! Just not in the budget! Damn
Click to expand...

Such a deal though! AP still has the exact same rear bumper design for sale and it's $699 before powdercoating and shipping. You buy mine and it's like getting a front bumper for free and you can pick up today.

azshooter40 · Sep 6, 2018

Seabass said: ↑

Such a deal though! AP still has the exact same rear bumper design for sale and it's $699 before powdercoating and shipping. You buy mine and it's like getting a front bumper for free and you can pick up today.
Click to expand...

I’m in Ohio right now , I could definitely have the cash next weekend but if you got buyers waiting I’m not going to hold you up

DukesTaco · Sep 6, 2018

Enjoihavok said: ↑

I second this, sell to duke, keep in the real aztw family, versus the randoms from Facebook.
Click to expand...

Yes and I bring cash$$$ and jalapeño bacon to spice up the deal .

DukesTaco · Sep 6, 2018

Seabass said: ↑

Already getting PM's. I listed them on the AZ TW facebook page, too.
Click to expand...

Cash and jalapeno bacon in hand

Seabass · Sep 6, 2018

azshooter40 said: ↑

I’m in Ohio right now , I could definitely have the cash next weekend but if you got buyers waiting I’m not going to hold you up
Click to expand...

I'm getting lots of questions and interest, but you never know...

DukesTaco · Sep 6, 2018

Seabass said: ↑

I'm getting lots of questions and interest, but you never know...
Click to expand...

No questions here just interest I can be in Phoenix to pick it up tomorrow

azshooter40 · Sep 6, 2018

Seabass said: ↑

I'm getting lots of questions and interest, but you never know...
Click to expand...

Keep me posted! I might get lucky

LTacoman · Sep 6, 2018

sell to @DukesTaco

Brindybot · Sep 6, 2018

DukesTaco said: ↑

Cash and jalapeno bacon in hand
Click to expand...

Seabass said: ↑

I'm getting lots of questions and interest, but you never know...
Click to expand...

Take the money and bacon!! Both are getting good deals!!

azshooter40 · Sep 6, 2018

DukesTaco said: ↑

No questions here just interest I can be in Phoenix to pick it up tomorrow
Click to expand...

Damn you! Would rather you get them than some douche from Facebook

DukesTaco · Sep 6, 2018

azshooter40 said: ↑

Damn you! Would rather you get them than some douche from Facebook
Click to expand...

#Bumpertonodouche

Enjoihavok · Sep 6, 2018

@Seabass you got a locked in buyer with duke, you don’t have to keep wasting your time.

RPS1030 · Sep 6, 2018

Enough of a deal I wish I had a 2nd gen.

RPS1030 · Sep 6, 2018

DUKES
DUKES
DUKES
DUKES

LTacoman · Sep 6, 2018

Seabass said: ↑

Ok folks, up for sale today are my old All-Pro front and rear bumpers. They were installed on my truck for 8 years and never once took any impacts or physical damage whatsoever. I had them stripped of the old thermal coating and had them freshly powdercoated with 60% gloss finish black inside and out for this sale. They are better than new, because new were shipped bare when I bought them and they had to be assembled.

-------------------------------
Both bumpers fit 2005-2015 2nd gen Tacomas

Front Bumper
These are the old-school version original All-Pro plate front bumpers that came in 3 main pieces that get bolted together. My powdercoat guy actually unassembled the whole thing and stripped the old coating out from between the 3 main pieces, put it back together, and powdercoated it as one piece. It's solid as a rock because of how many damn bolts go into assembling these, no matter what anyone says. All bolts/nuts are intact and now they are powdercoated over so you don't see any shiny steel anymore. I ordered this one with the center hoop, and there are 2 light tabs on the hoop itself. You use your factory 6 nuts for the front mounting spots, and I have the hardware for the frame tabs where additional supports attach. I have the spacer washers to level this thing out perfectly, too. You use your front large factory bolts that are already on your truck for the final 2 supports. This thing mounts straight and level and let me reiterate that it has never seen any impact. Not to mention this thing is super frigging thick plate steel, not that thin lightweight crap. The front bumper weighs 130lbs. 2 mounts for 3/4" d-ring shackles are welded on (no shackles included with sale).

Yes, this fits a winch. I had a Warn M8000 in it and there's room for a the controller next to it, too. I know up to a 10000 would fit. Holes are already drilled for standard winch mounting. You provide the fairlead of choice for the front.

--------------------------------

Rear Bumper
The rear bumper is one piece and weighs 80lbs. The All-Pro hidden hitch is required if you want to tow. I did not get their hitch. You use your own factory bolts for the install (6 total - 3 on each side of the frame). I also had this powedercoated inside and out and there is no damage. 2 mounts for 3/4" d-ring shackles are welded on (no shackles included with sale). You provide your own license plate illumination lights.

--------------------------------

I'm asking a firm $900 for the set, or buy them separate for $700 for the front or $300 for the rear. It would be a shame to split up the matched set, so I'll entertain separate sales if these don't sell as a set for at least the first week. I just spent $350 on powdercoating and you get to save hundreds on shipping and tax so this is a SMOKING deal. No low-ballers here, folks.

I'm on the northwest side of Phoenix, at approximately 67th ave and Happy Valley. You pick up, you haul away, cash only.

PM me for interest. I'll try to watch this thread as best as I can, but PM gets my attention much quicker.

How they looked installed on my truck (you can see the old thermal coat that was peeling off in spots) :

Here they are shiny new, picked up from powdercoat today (ignore the fingerprints and smudges from when I was unloading):

Click to expand...

Will these Bumpers fit a 3rd Gen? asking for a friend...

DukesTaco · Sep 6, 2018

Enjoihavok said: ↑

@Seabass you got a locked in buyer with duke, you don’t have to keep wasting your time.
Click to expand...

Dam you mofos know me .lol

Seabass · Sep 6, 2018

aaand sold. See you in a few hours, Dukesy

LTacoman · Sep 6, 2018

https://media.giphy.com/media/13GKP7xGjce5oI/giphy.mp4

azshooter40 · Sep 6, 2018

@DukesTaco congrats!
If need or want some help with install let me know!

DukesTaco · Sep 6, 2018

Anyone need a azrw express tonight?

Ohh and guess who has two thumbs likes bboobs and is getting All Pro bumpers tonight .

this fucking guy that's who .

Log in or Sign up

Welcome to Tacoma World!

AZ Classifieds

#36761
Seabass Give it to me. I'll break it for you

#36762
azshooter40 Well-Known Member

#36763
DukesTaco Well-Known Member

#36764
DukesTaco Well-Known Member

#36765
Seabass Give it to me. I'll break it for you

#36766
DukesTaco Well-Known Member

#36767
azshooter40 Well-Known Member

#36768
LTacoman Well-Known Member

#36769
Brindybot I don't see the problem.

#36770
azshooter40 Well-Known Member

#36771
DukesTaco Well-Known Member

#36772
Enjoihavok Never Forget Z.S.

#36773
RPS1030 Well-Known Member

#36774
RPS1030 Well-Known Member

#36775
LTacoman Well-Known Member

#36776
DukesTaco Well-Known Member

#36777
Seabass Give it to me. I'll break it for you

#36778
LTacoman Well-Known Member

#36779
azshooter40 Well-Known Member

#36780
DukesTaco Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

AZ Classifieds

#36761 Seabass Give it to me. I'll break it for you

#36762 azshooter40 Well-Known Member

#36763 DukesTaco Well-Known Member

#36764 DukesTaco Well-Known Member

#36765 Seabass Give it to me. I'll break it for you

#36766 DukesTaco Well-Known Member

#36767 azshooter40 Well-Known Member

#36768 LTacoman Well-Known Member

#36769 Brindybot I don't see the problem.

#36770 azshooter40 Well-Known Member

#36771 DukesTaco Well-Known Member

#36772 Enjoihavok Never Forget Z.S.

#36773 RPS1030 Well-Known Member

#36774 RPS1030 Well-Known Member

#36775 LTacoman Well-Known Member

#36776 DukesTaco Well-Known Member

#36777 Seabass Give it to me. I'll break it for you

#36778 LTacoman Well-Known Member

#36779 azshooter40 Well-Known Member

#36780 DukesTaco Well-Known Member

Products Discussed in Entire Site Forum: Arizona Thread: AZ Classifieds

#36761
Seabass Give it to me. I'll break it for you

#36762
azshooter40 Well-Known Member

#36763
DukesTaco Well-Known Member

#36764
DukesTaco Well-Known Member

#36765
Seabass Give it to me. I'll break it for you

#36766
DukesTaco Well-Known Member

#36767
azshooter40 Well-Known Member

#36768
LTacoman Well-Known Member

#36769
Brindybot I don't see the problem.

#36770
azshooter40 Well-Known Member

#36771
DukesTaco Well-Known Member

#36772
Enjoihavok Never Forget Z.S.

#36773
RPS1030 Well-Known Member

#36774
RPS1030 Well-Known Member

#36775
LTacoman Well-Known Member

#36776
DukesTaco Well-Known Member

#36777
Seabass Give it to me. I'll break it for you

#36778
LTacoman Well-Known Member

#36779
azshooter40 Well-Known Member

#36780
DukesTaco Well-Known Member

Products Discussed in