SOUTH GA BOYZ Meet-Greet/RIDES/MOD Day To be posted

Same! We ended up not finishing until after 9PM with Michael's truck. Those FOX Shocks were the biggest pain in the ass of the entire day (besides the U-joint issues with Travis).

How much height did you lose in the front, did you happen to measure? You probably added 250lbs or more to your rig with the bumper and sliders.

 

Sounds like when we did my lift, dawn till night. I was 1.5hrs late home and wifey was not so happy, but we still made the comedy club and the dude (John Heffron) was hilarious.

I didn't measure the before and after (I always forget that stuff) and taking pics...but it doesn't pass the eye test. I'm guessing its down 3/4" maybe?? And its sitting 1.25" to 1.5" lower than the back.

 

I cant remember anything taking more than 10 mins.

 

Sure .. took me 10 mins to get home too
Was great finally makin one ... glad you didn't faint or anything @Mudfootshuffle

 

First short off road adventure in the books.

 

Shot from SETO 14.
great times at windrock this last weekend

 

So the flange that had a crack in it blew up at 70 mph on 75. Got to the side, dropped the carrier bearing and the front of the shaft, threw it in the bed, installed the new u joint and rear flange in the Orileys parking lot and made it to SETO by 12:30

 

Picture I found in my comptuer today of my old 07 I almost cried!!!

 

Picture I found in my comptuer today of my old 07 I almost cried!!!

 

He even climbs trees!

 

@Traviste ,looks like that right rear tire is 3ft off the ground!

 

She was up there. Pic got taken about half a foot after the apex.

 

Anything else left to break?

 

Boys and girls (cough... cough... @H3ATH3N2016) it is finally here!!!!!!

 

tons but

 

So @natesmitte500 has got that Prinsu, I got #700 front springs and AAL to get my mojo back. When is the next mod day?? I also need to go back to 33's, thinking about Toyo M/T Actual diameter of 33.5" so I ordered CMC plates as well. @17tacostormtrooper Do you have a welder at the shop?? Let's do this!

 

I also need a mod day, I have had the TRD Pro suspension sitting in a box for about 6 months waiting for me to decide on what to do with the rear springs. I finally order Icon RXT leaf packs yesterday. Once they come in, I think I will have everything I need for the lift.

 

You prolly won't need to CMC with skinnys, but if you wanna bump to 285/315 down the road you most certainly will need to chop.
I'll let Zach confirm, but I'm pretty sure he has a Miller 215 in the shop.

 

Yea, seeing as this will be my fifth different tire setup in 1yr, i'm preparing for the unknown...haha. The Toyo M\T are the tallest tire in the 255 lineup and the CMC doesn't look like it will take all that much time, will probably do some pinch weld bending as well.