Anytimebackupcamera.com Install- Front and Rear Cameras

Just tried the code and unfortunately the the promotion has ended. Thanks for the write up and link to the camera. It definitely will be useful when off road.

 

This is on my list.

All in, with harness, camera, switch, etc... What's the end cost?

 

My camera was $13.99
Switch was $15
Full set up is $100 (I used AUG18 TW discount) $85

 

Damn. Just ordered the full kit but switch sold out. Any others that work? Or should i hang on. Seems like theyve been sold out for awhile

 

This might be the same switch?

CALAP-STORE - Universal Car 12V 7 Pins FRONT CAMERA REAR CAMERA Switch LED DPDT ON-OFF-ON Rocker Switch RV Boat https://www.amazon.com/dp/B07FTB7J7Z/ref=cm_sw_r_cp_tai_tKiLBbHYMKH6D

 

Seems to big

 

It looks about the same as the one I got. But not really sure.

 

Its 5cm x 2.5 cm

 

That’s the same size as the aironboard.com one. Looks like the same one to me

 

sub'd. Need to do this

 

In the process of this also. Just bought a switch from Rocker Switch Pros. Guessing it's going to be on the large size, but we'll see. I don't mind a little dremel work if I have to.

https://rockerswitchpros.com/product/vjd2-u66b/

Ends up being under $30 for the switch as you need to buy the switch body and the switch activator, which you can customize.

 

All DPDT switches are essentially the same basic plug schematic on the back. The center left and right plugs, for this install, would be the black wires off the harness. The upper and lower left side would be the red wires from the harness. The red relay wire goes to the upper or lower right side depending on which switch is the front camera. You can easily trial & error it.

If you have more plugs, like a 10 plug configuration then you have backlights and such. You can refer to your wiring diagram that comes with the switch.

 

Nice write up But what if i just need a switch for front cam only and id like the oem style , which one should i go with? Or the kit designed for both front and back ?

 

Same here, but just want the front camera!

Great information here guys, once again topnotch!

 

My guess is you can wire up just the front camera switch. You need the full kit as the basic one is the rear camera override. The full kit includes the front harness that then taps into the rear override to input the front camera source. When the switch is off the screen behaves normally and will only display the rear camera in reverse. When you select the front camera it pops on, so one switch should work.

I believe this is the OEM size for Tacoma’s, but I didn’t use this switch.

$24 CH4X4 Push Switch for Toyota Tacoma, FJ Cruiser, Land Cruiser, Fortuner, Hilux, 4Runner, Prado 12V 3Amp - Front Camera Symbol 2 - Blue LED

https://www.amazon.com/CH4x4-Toyota-Switch-Camera-Symbol/dp/B06Y4FSL6Z

 

I hear ya, as I don’t tow much I don’t really need the anytime reverse view, but I figured a day would come when I would need it and the difference of a dual rocker verses being limited to just a front camera wasn’t worth it to me.

 

Good point Dave, especially since it's virtually the same price and double the functionality!

 

Does not ship to canada

 

The Amazon one doesn’t ship to Canada? Lame

 

Sends me to Amazon usa and when trying to buy says does not ship. Found another on ebay but 1 month delivery. Give it a shot or else wait for aob