Post Up Pictures Of Your Stereo Upgrades!!

I got mine off Amazon marketplace. I paid $260 for it. Pioneer states that it is a $700 msrp though.

 

-is that sub a "slim" design? i have an AC too n need a smaller box.

 

my new 10's should be here tomorrow so i will be starting my new box today. will post pics of the progress later on tonight.

 

If you wouldn't mind, Could you post up the measurements?

Thanks

 

sure. I'm building a single enclosure for 2 10's. the overall external dimensions are 43wx18.5hx7(bottom depth)x4(top depth).

 

if my calculations are correct it should equal out to approx. .75-.80 ft3 of airspace per sub. i also have it split internally to 2 chambers.

 

this is where im at so far.

 

and more....

 

last set. dear lord it hits like a mofo!!!!!!

 

I saw a comment about DD fit so I figured I'd post a good picture of how mine fit.



Here's a look at the dual 10" sub cabinet I made to fit behind the rear seat in my double cab. I've had the seat back installed so I know it does fit.

 

How good does the PAC SWI-PS work? Ive heard there is a delay to it, curious what your thoughts are. Is it worth it? Do you recommend it? BTW, your setup is amazing!! Great Job!!!

 

Too ashamed to show the amps since they are just placed behind the rear seats. I love the setups you guys have. I'll have to spend my next 3day weekend cleaning up my audio setup.

 

I had the same one in my 2nd Gen

 

montgomery_30824 & DallasPre If ya'll could post up dimensions of the outside of your boxes, as well as what, if anything, you trimmed or cut off the back wall (like the carseat anchors) and whether or not the box would work with the plastic seatbacks I'd really appreciate it.

 

Heres my build page..http://www.tacomaworld.com/forum/audio-video/87838-new-install-09-dblcab.html

I only cut the carseat anchors off and about an inch to half and inch of the trim plastic at the top left and right of the box.I did NOT cut the brace in the back. Dont have all the dimensions but its 55 3/4 at the bottom and 51 1/2 at the top and goes from the floor to the bottom of the back glass. I used a shallow woofer so i could mount it high enough to see when the seats are folded down. and i am able to close my seats with the plastic on them. i just spaced the seat latches out about an inch. doesn't really effect comfort im told.

If i can help ya out anymore feel free to ask.

 

Write up on how you did the clock lights blue is NEEDED!!!!!!!!!!!!

black harzad/ac vents come in the base models. this question has been asked and answered so many times.

heres mine.

kenwood ddx 512


boston acoustics g5


kenwood eXcelon KAC-X10D Amp drivers under seat

pioneer 6x9's up front and 6.5's in back

 

Any chance you have depth, out from the back wall, top and bottom?

Can you elaborate on this? I'm not exactly sure what you mean here?

ETA:
I think I see what you did now. You drilled out the welds holding in the latches and then bolted them back in with 1" spacers made of pipe or something else, right?

 

thats exactly what i did. and ill measure and get back to you on the depth

 

No complaints. I don't notice any delay, maybe I'm just slow. I highly recommend the swi-ps for complete functionality. Thanks for the kind words.