Feed Your Addiction: Tacomaholics "Anonymous" Support Group

I have both standard ball hitch for the utillity trailer and lock n roll for the camper. There are others also

 

The pivoting hitches are a great asset even for highway applications they're much more smooth

 

Nice idea

 

Add a piece of suare tube to the tongue with an internal dimension of a reciever. Lock n Roll makes a trailer piece that sldes right in and can be either pinned or welded. Lok in my camper build it should tell you what page in the op
Edit: it’s on page 24

 

Could you get a alumnum tube then and weld it in then just pin the steel end of the lnc in place. That way it could also be removed as a theft deterent

 

I damn near lost mine on flag pole they can unhook if tou try hard enough

 

Taking the sledgehammer to the Tacoma today fellas! Big thanks to @UTtaco34 for providing the amazing outro image!

Watch the video HERE.

 

Well I'm sure that many of you have heard the news regarding Pelfreybilt. Things just went from bad to worse.

Watch the video HERE.

 

Im here for the CMC video with the chick fil a cow outro picture

 

I'm aiming for a Tuesday upload for that one. I need to dig back and find that pic now.

 

I’m trying to figure out why he needed another cmc done he had Danny do one earlier do they grow back

 

He didn't cut enough off. This is where I cut them for a standard 285 CMC. Pictured below is Brians cab mount before I got my hands on it.

 

Picture doesn’t show for me but that makes sense I thought perhaps CRS had kicked in again.

 

What about now??

 

So where the red line is is where you cut and all the rest was left after the first time? I usually cut all that face off all the way back into the bolt opening. He should have good clearance now

 

Yeah I cut back to the red line! Get as much clearance as I can without having to box it in.

 

We all do it a little differently. This is why I make the plates myself. It allows me to cut even more of the mount away and then I replaye sith 3/16. I try to cut even back into the hole, leaving enough to temove the hardwate if need be, and angle the plate back at the bottom a little. For 34’s or 35’s i cut the whole end off also and do the whole thing with a rounded taper.



For these i cut all the way back to the frame as well. In the cut pic thats as far back as I go for like 285’s i just don’t cut the end off. Fun stuff cool your staying busy with it

 

Yep, zero rubbing now!

 

Hammer time!

 

Sub’d