What Have You Done To Your 3rd Gen Today?

What fogs do you have?

 

I have two extra "feet" for the light to be installed on top of the bumper. Free if you like me to send them to you?

 

Those are the OEM fogs with LED aftermarket inserts. UMMMM will have to find the brand. Will get back to you. Also modded the brackets to fit into the cutouts.

 

Appreciate the offer, but I've already got mounts. I planned ahead knowing a winch was coming.

 

P.M ed you. Before I got the last msg. Never mind.

 

Thanks! Any idea on how long the sale will last? I don't quite have $350 laying around at the moment. Either way, this looks perfect.

 

Plasti-dipped the hood scoop, not sure yet if I'll add the hood decal, we'll see how the glare is now.

 

Probably until they're gone.

 

I know what you mean about the glare from the hood! I have a Barcelona Red and I'll tell you it is brilliant to say the least when I am driving home after work into the sun! Just can't or do not want to mess up the hood! You know what I mean?

 

You are correct! P.O.S. batteries! I was in my 2007 and only had a couple years on it and hunting in the BACK WOODS it took a shit on me! I opened it and had to put water in it and waited for an hour and tried to start it again and it started, so I left and went all the way home and bought a GOOD battery and went back. BITCH! Sorry for the unseemly language ----- but I was PISSED!!!

 

Oh, one word of advice? If you reverse the mounts when mounting your light to your bumper it will make it a little harder for "something" to steal it. All you need is a 3/16 ball ended Allen wrench and wiggle it into the screw! Then tighten it from below. Hope that helped?

 

Yeah, I figure if I don't like it, the dip just peels off.

 

Is that a C-5 Galaxy on your flag avatar?

 

Looks great

 

Looked them up on my chart of mods. The fogs are "LumenH11XHL C-G7S LED" conversion kit. $146.38.

 

I've struggled with this too. There are extang tonneau covers that work with a tool box you have installed. That's the best I've found. But I also have the factory tonneau cover and don't want to have to get a new tonneau with the tool box. Best I've found is to get a husky wheeled tool box and just bungee it in the back. Then you can remove it real easy if you want max bed space and it'll fit under your tonneau.

KB voodoo does make one but it takes a lot of your beds space. Still worth looking at though

This is the one I bought

 

Are these fairly water resistant if you do not have a cover?

 

Don't you mean WaterProof?

 

Yeah they're very water tight. Water has to make it past the door to ever get in the drawers. You would have to submerge it for that to happen.

 

yes it is!