1st Gen Lunchtable Thread - General Discussion

Supercharger?

 

I have the AllPro Standards. What’s up?

 

Fixed

 

True

lol he'll never let him live it down. Lol

 

Well normally im not the one giving him shit about it, Thats you guys

 

Trying to decide on my next set of springs. I was hoping for some measurements. If you don’t want to or have time I understand.

If you don’t mind...

Hub to fender measurement and what kind of added rear weight you have.

The distance from the front hanger bolt to the center pin, measured along the arch of the spring.

Distance from the shackle bolt to the center pin, measured along the arch of the spring.

Again, don’t go out of your way if it’s not convenient.

 

I don’t have my truck handy right now, but I can get them for you in a few days.

I did get about a 3” lift after all was said and done, however. I have about 100 pounds in the bed from my toolbox and that’s about it.

 

I’d appreciate that.

 

Don't lie lol you give him shit just as much as us.

expos should be the same length and such since both fit in stock locations

 

It’s not the overall length that I’m curious about, but rather the location of the center pin along that length.

My Dakar spring’s center pin is forward of the stock center pin position by about 3/4”. Currently using axle relocation plate to negate this

 

Ive been to a place in seattle that mills those driveshafts and crank shafts out of solid blocks of metal. Pretty amazing. Love the episode of how its made on locamotive maintenance too with people climing into where the engine piston is. Absolutely insane!

Ahh her cooter probably smells like fluid film

he only made one 1st gen front bumper, and had the frame of the rear tac’d together was what I saw in his shop as of the begining of August. the bank then took everything a week or so ago from what I heard around here. Sorry man but everyone involved is getting screwed. They had a shit ton of product in there too.

 

If you are going to switch leafs Ill pick up that relocate plate off you. Too scared to buy a new one from them with all the talk of not drilling holes in the right spot on their bumpers

 

@BartMaster1234, have you even lifted the front end yet?

 

No he hasn't. He might stink bug it forever

 

I think at this point he's only doing it to piss us off.

 

Sounds like a rebellious teenager thing to do

 

I'm 39, so I think if I start telling him that stinkbugs are "cool", that might just push him over the edge and lift the front. For sure if we get his parents in on it...

In my best dad voice:
"Hey son, I really dig that righteous truck you have there. That's like way cool dude!"

 

Are you a dad from the 70s? Lol

 

I’ll let you know. I’m very early on in figuring out what I want. There is another vendor that makes them, but I can’t remember the name.