What Have You Done To Your 2nd Gen Tacoma Today?

Had that issue when I first got mine a couple days and use and they were good to go!

 

How hard was it to run the cable?

 

Turned my truck into the Millennium Falcon

 

Super simple, just took off the tail light. There is a hole where the brake light cables run. Stick the cable in there then ran it over the storage box then over the wheel well. on the other side of the well I just ran it down under the edge of the bed and there is a rubber grommet in the back of the cab you punch out. I didn't feel like re-soldering the coax cable to the fitting so I drilled out this hole to 3/4 and put a 3/4 rubber grommet in so it doesn't rip the cable. Then ran the coax along the door sill and under the seat to the center console. Ground wire I ran through the same hole in the bed then down to a bolt on the frame. Took me a total of like an hour to remove, drill, run the cable then bolt it all back up.

 

Well good and bad day. Still cleaning out stuff and getting for Garage Sale of my Woodworking and Automotive stuff. Got Email that my MESO map light will be here today but went out to move truck and RF Headlight has a lot of moisture on the inside. So $200+ for new housing Left one fine, no rain haven't washed it just cool night and sun shinning on it. Damn and only 35K miles on my 2010 TRD Sport so it has the darker tinted housing. Will wait until first of month to get maybe the garage sale will help pay for it.

 

hmm, I noticed a jingling sound from under my truck after the lift and when I went to inspect it I found brackets not re-attached to either side of the Dakar leafs that hold the parking brake lines in place. I went ahead and put a screw in to re-attach them, I wonder if they were not secured by accident or if the leafs being fully extended would pull on the break lines...

 

Thanks. I did not get numbers, just had all the lug nuts and u-bolts re-torqued @ 100 miles. If it deosn't get better as the truck settles then I will see about another alignment and get the numbers at that point.

 

FWIW:
After a good alignment, it was better on-road. Still, not perfect and had some wobble feeling.
After SPC LR uppers, it was 100% better and felt more factory.

I'm on 5100s at 0 and 885s with SPC LR uppers, Fox Perf Series 2.0 ext travel and Deaver AAL in stock 3-leaf pack.
Junk ass sway bar delete a looooooong time ago.

 

Anyone wanna guess where I'm headed next June? Last of the necessary equipment acquired!

 

It went on pretty well had to do a little pushing to get it lined up but really not much!

 

Just noticed - Black Rhino rims?

 

I left mine unattached because I need to adjust them. The way they are now, if I attached them they’d get ripped apart.

 

Yessir! Black Rhino Rockwells! heres a pic of when I got em

 

Nice. Love my Black Rhino's too.

 

And much much cheaper lol!

 

you better put up a link so others can find the nxt uni filter mod!

 

https://www.ebay.ca/ulk/itm/382463952287

 

I think I paid $8.99 for mine w/ free shipping

 

What reason other than sitting higher would be a benefit for this mod?