What Have You Done To Your 3rd Gen Today?

Nicely done!

 

Installed Morimoto XB Fog Lights


Morimito on the left, stock on the right.

Overall I'm very happy with them, they match well with the @XenonDepot Xtreme LED's in my low/high beams. Quick and easy mod!

 

Finally got the longer wires to wire up my winch control box. So after 2 months of it on the truck, it now works!!

 

Installed the Dashtop Multi Mount yesterday, and then parked the Taco where it wouldn't get hit by a tree. TS Florence is working its way through.

Considered ordering Clazzios but the lack of hog ring attachment points is a no-go for me.

Checking out leatherseats.com instead.

 

Hog ring attachments?

Edit: found it. Just installed the Clazzio’s and I don’t see why this would be needed. They seem to fit like a glove.

 

I put on some Tufskinz “liquid chrome” letter overlays on the “TOYOTA” on my faux Pro grill. They look pretty good but I was expecting letters that would wrap around the existing letters like the black plastic overlays for the chrome badges instead of just sticking to the front of them. Maybe they will grow on me.

 

Hog rings are only for replacing seat skins and not for seat covers.

Sounds like a fair deal. I have 20k on my 2016 but would jump to get a 2018 exact replacement in a 4x4 for a little cash difference. And, by the way, nice choice of wheels. (note-old picture thus was before my plate bracket swap)

 

Well never mind, truck isn't getting lifted today like originally planned. Tech got the truck up and everything taking off and the toytec spacer wouldn't fit for some reason, they compressed the spring as much as they felt comfortable doing but still wouldn't fit. So I'm taking it to an actual offroad specialty shop on wednesday and see what have to say.

 

Im doing this very same thing. XBs are here, waiting on NEW Xenon Depot LEDs, supposedly 1900 lumens stabilized, and an SR bezel.

 

From the Clazzios thread. This looks terrible to me.

 

Don’t bother removing the grille insert for installing the fogs.
Easily installed reaching in from the top. Did it in about 10 minutes for both.

 

Just not pulled tight enough. Those are the best fitting covers made. I have seen poorly installed Katzkins that looked much worse. I have owned factory leather that got a little puffy in the butt after a couple of years too.It all comes down to the installer. And with Clazzio you simply untie them and tighten them up. With Katzkins you would be removing seats and hog rings with the hopes you don't damage the hog rings when you remove them.
disclaimer: this is in no way a secret message to my high school ex-girlfriend Melody aka "Puffy in the Butt"

 

Ok cool. I have to pull off grille anyhow, ditching chrome bezel

 

Installed anytime Front and Rear camera, switch pro 9100 on a @mesojdm custom switch panel, and Rock lights.
Thanks Brian! I got it all hooked up on my limited and windows, sunroof, and aircon panel lights inop lol called him and he told me what fuse I’d blown and also why......only relay ground hooked up with switch pro....oops.

 

DMM

 

You're gonna like that setup!

 

Finished the install of my Front Camera that was made available from the anytime rear camera mod (https://anytimebackupcamera.com) . Very easy install with basic electrical know how.






Better write-up here: https://www.tacomaworld.com/threads...-and-rear-cameras.567192/page-5#post-18707705

 

It's around $59 from the dealer, but listed for $90 if installed on a new truck. Nicely made and fits great!

 

It's the bezel from the SR, part number

$154 52711-04010 Toyota Genuine Parts - Moulding, Fr Bumper (52711-04010)

52711-04010, cost $82.50 + tax from the dealer, comes painted matte black. Exact replacement for the chrome bezel. Held in with screws and clips. I thought about going with the PRO grill, or an aftermarket, but this keeps the stock look. I like the gun metal insert, and really like the sport wheels, I just wanted to have something different and tone down the chrome.

 

This is what I have.

$25 Motivx Tools Engine Oil Funnel for Toyota, Lexus, and Scion Vehicles with Threaded Oil Filler Caps – Fits Most Camry, Corolla, RAV4, Tacoma, Highlander, Sienna, Tundra, RX350 and Many More

https://www.amazon.com/Motivx-Tools-Engine-Vehicles-Threaded/dp/B016FVJUX0