AZ BS Thread 4²0

See my sig

 

You just blew the welds on the intake

 

hes ruining mine by not buying my bucket

 

Happy Birthday @Nitori

 

Now that's F'n funny!

 

Be on the watch for rear driveshaft clunk, as there is a tsb on it. Transfer-case actuator will start leaking eventually. There is one seal internally and an o-ring externally. You will see drips on the ground with this leak. The dealer way is to pull the case off and reseal. You can pull the actuator out, but it does break a piece of plastic on the inside. The internal seal is not available, they try and force you to buy a new actuator. The seal can be had from colonial seal. If you take the actuator top off and its full of fluid the internal seal has failed. I have pulled the t-case and pulled the actuator. I would only pull the actuator going forward as it is a reoccurring leak. About every 70k miles. You will get 12-13 mpg when fully loaded and armored. You need to do cab mount chop in the front if you want to run 35's, also a 1/2inch body lift will hep with the 35s. Lift kits are spendy depending on what you want to do. I am going long travel so $$$$. Easy to swap in a locked axle out of an FJ Cruiser. I just did this! Go 2012 and up for the larger r&p. Radiators leak on these at the top seams. It is common. Heated seats suck compared to 100 series. Dashes are prone to cracking on early trucks. I run a southern style off-road front bumper. Not very pleased with it. Metaltech makes a nice one, but you have to put the solenoid in the engine bay and that wasn't worth it to me. Windshields can leak on these and corrode ecu.

 

Yea that shit looked wet lol

 

Wetter then @Nitori sheets after a pillow session.

 

That kid gets fucking owned! hahahah thanks man.

@GCosmo @Blender @Man of Steel TRD @TACOVRD @azshooter40 @Aw9d @AZeyeTIE @tymeson @cmack , anyone I missed, thanks!
I'm surprised there were no pillow humping gifs posted with jokes about 3-ways... slackers all of you!

Hah, I've seen his setup but I didn't see it until I already had mine mounted up. I don't think he copied me, but I wonder how level his light mounts are.

He's obviously spent waaaaaaay more on his build than I have though.

Well... but I guess now that the keys to my house are released I can take on shitloads of unsecured debt and even the field!!

 

For those not on FB, did this guy get out? He post pictures of where he was stuck?

 

Happy Birthday @Nitori

 

It’s Hockey Night in the Desert!

 

@Enjoihavok thoughts on this? https://www.commencalusa.com/Mobile/el-camino-650b-girly-2018-c2x23712985


Never mind, woman's bike

 

Last update was that his buddy with a 4x2 got there... this could either go good... or very bad lol

 

Oh man. Yes, this can quickly go one of two ways. Rain in the forecast to. Any chance of the lake creeping back up to where his vehicle is if he doesn’t get out?

 

Out if the loop. You had to rescue someone out there before?! Not the same guy is it?

 

Has anybody ever wet sanded their headlights to make them look all nice and new again? If not what do you guys use?