Cali Raised LED Side Projecting LED Pods *NEW PRODUCT*

Oh Ok! Got it! sounds easy enough. Thanks again

 

Wait, where are you supposed to mount it? I thought it was supposed to go into the bolt that's right next to the ground on the chassis (a few inches towards the cabin). That fit on my truck without any drilling.

 

Crappy pic but added Caliraised LED Bar and Ditch Lights. Both harnesses worked out great. Some bending and adjusting of the hood brackets as the passenger side was a little off. got the OEM switches as well, they look great but when ordering from them make sure you tell them what size switch you need cause they have 2 sizes. Overall happy with the way they came out. thanks again guys!

 

Thanks for choosing us!

 

I have absolutely NO wiring experience - am I going to have any difficulties with this? It seems pretty simple, but electricity and I don't get along most days.

 

With our wiring harness it makes everything super simple when coming to wiring. All of our lights are plug and play.

https://www.youtube.com/watch?v=QJ3Nt5EmkS0&frags=pl,wn

Heres an install video on a guy installing his ditch lights with the wiring.

 

This is not my truck, it's a pic I found online. (I'm at work right now and don't have a pic of my truck at the moment).
I drew the red line to show where I'm trying to mount the relay.
I wasn't trying to buy a relay holder. I'm going to use the step bit.
Where did you mount yours?

 

I attached it to the bolt just to the left of the ground in that picture. the one holding the plastic bracket to the body, whatever that is. Sorry I can't get a pic up, I'm at work.

 

Gotcha
I’ll try that first before I drill anything lol.
Thanks again!

 

@CaliRaisedLed are the plugs for these lights the same as the plugs for all of your lights?

 

Do the side projecting lights interfere with radio station signals. Does it make what you’re listening to turn to static?

 

Anybody know how to connect the push button switch to the wiring harness?

 

Here’s a video from them. It’s not for the ditch lights but I believe it’s the same wiring harness. A lot of people have been asking. The actual ditch light install video doesn’t go into this much detail about the wiring.
Hope this helps!
https://m.youtube.com/watch?v=_LGnrt19fIM

 

Does anyone have any tips for pulling the switch wire through the firewall grommet? I was having a hard time with it, and had to give up after about 15 minutes because I was running late for something.

 

https://www.youtube.com/watch?time_continue=545&v=_LGnrt19fIM
9:05 of the video explains how we do it. Are you attaching it to a oem switch?

 

Thank you for helping out!

 

I have a 2nd gen, so the grommet looks a little different. He explains it briefly, but doesn't actually show how he did it. Would it help to stick a flathead through the grommet and then feed the wire through? I was trying to push it through, but it wasn't going...

Yea, I am going to wire in the OEM Switch.

 

I would make a little slit in the grommet and get electrical tape tap the wire to a flat head and push it throw that way.

 

That's a good idea, thanks!

 

We have never have heard of that problem.