Chux's 2013 Beach Buggy Build

Awning maintenance

Got this awning 4 years ago and with lots of use it’s showing it’s age.. Nothing a little TLC can’t fix. The velcro is shot that goes around the horizontal bars. Being sewn into the canvas I really can’t replace it that easily, so decided to add snap buttons to the velcro..

 

Taking steps backwards to go forward...

Making my sliders into family friendly steps.


POR-15 delete.

 

Whatcha coating them with?

 

When I removed the sliders and addressed the corrosion on the frame someone suggested VHT chassis paint. I prepped and painted the frame and liked it. So gonna do the same on the sliders.

$18 VHT SP671 Roll Bar and Chassis Paint – Satin Black Spray Paint – 11 oz Aerosol Can

https://www.amazon.com/VHT-SP670-Gloss-Black-Chassis/dp/B000CPAVI4?th=1&psc=1

 

Slider step progress..

Wire wheeled the second slider today. Started to make the weld tabs for the sliders that the top plate would be riveted to. I made 11 total which is enough for one slider. Gonna tack them on tomorrow and make another 11 for the other side, than paint. Final step will be the template and final cut of the aluminum diamond plate.

 

That’s a pretty brilliant idea

 

Loving the progress in this thread lately.

 

To all the RTTers, this is genius.

Trolling the early morning webs I cam across this. You know how many times I’ve spilt a beer in my RTT.. I would easily spend the Tepui price, than someone drops the Amazon link. Oh hell yea..

$28 Gator Frameworks Microphone Stand Accessory Tray with Drink Holder and Guitar Pick Tab, 12" x 7" (GFW-MIC-ACCTRAY)

https://www.amazon.com/dp/B00YJ5C46K/ref=cm_sw_r_cp_apa_n1dPBb2NWN8Y5

 

That was a fantastic find. It’s also on my shortlist

 

Daddy got a boat. Here’s the plan..

https://youtu.be/HsIKMeSC6_4
https://youtu.be/9DP4XGyQ3Vw

 

Power washed the boat and found a small hole. Researching aluminum boat repair points to aluminum rod brasing as best fix. Gonna be a good time when this thing is sea worthy

 

Slider step progress continued

Got the tabs welded on.
My new (to me) mig is having issues so it’s down at the moment.
Burned them in with some 7018..

https://youtu.be/lt1a6oForrU




Por-15 ready prep




Went the extra mile and burnt off any impurities..

https://youtu.be/YC8G9fIAs-M


Really digging this VHT paint.
Cans go quick but it lays on smooth, great hard finish to it, and it’s quick drying.

 

EDIT: Taking the ridiculously obvious route....

 

Quality work as usual my friend!

 

Vermont 9/14 - 9/16

 

that's awesome! what was the hanging storage thing? was it from blueridge something something? lol

 

Yea the BROG Tacoma Attic. Hella expensive for what it is but I like the custom fit. I’ve played with some netting to make my own but nothing as clean. Also seemed small when it arrived but to hold some rain coats, hats, baby toys, etc.. it does it’s job.

https://www.blueridgeoverlandgear.com/Tacoma-Attic-p/21toa-4.htm

 

See the reason I asked, is i had a feeling you played around making your own lol, since that was my plan. i think it's a genius space to store stuff, and i'll probs be buying one eventually. it's too perfect for even towels to wipe a muddy dog off haha