What Have You Done To Your 3rd Gen Today?

Finally got around to mounting this thing.... and man, found out Co2 refills are pretty much impossible on the weekends

 

ME-SO Custom Switchback Turn Signal / OEM Switchback Turn Signal

https://youtu.be/qF3K9eKpylU

https://youtu.be/By72bVBKDMU

You can find the complete writeup HERE

 

Looks great! This is the same one I plan on getting myself. Thanks to @cemented

 

That uniden rocks!

 

I know it does. I still haven’t pulled the trigger on it yet but I will. It’s onky been like 6 months since you told me about it. Haha

 

How was the quality of the vent shades specifically the lower edge? I ordered the same ones and the bottom edge of all was not a smooth straight edge (rough/jagged). I’m getting replacements I just hope the manufacturing is better and I got a bad batch

 

What suspension are you running? Looks good! Looking to lift mine soon and like that height and level rake.

 

So clean! Damn now I want to take off all my stickers.

 

Just got the V4 @mesojdm lights and also put in the dome light as well. Great products and talk about quick shipping

Need the tail lights now and I’ll be one happy guy!!! Hey @mesojdm not sure if you rebuild anything for prototypes but if you want these mirror signals or if I’m lucky enough to grab some tails you can have these to do your magic on. I’m in Roseville so can ship them quick! Thanks again for these great products!

 

what tire size? KO2s?

 

3" after settle with 887/ bilsteins + 1/2 top plate spacer on driver side, 1/4" on passangerside. Spc uca, heavy duty dakars. 3* shims, ecgs bushing and a toytec diff drop to helpwith cv angles

 

Didn’t notice any issues, but there was something sticky on one that had to come off.

 

What tire size did you go with? 265/70R17

 

No lift. It would rub a tiny but in the fender wells while articulated and turning but I used a heat gun and folded the bottom corner up in the front and got rid of a little bit that sticks out in the back. I haven't rubbed since and the tire is about an inch from the UCA. Idk if you would be able to comfortably fit the 285s without the extra inch in height and offset. I think you would run into an issue at the uca before the fender wells or cab mount though. If you have a pro I'd do it 100%. Toyota engineers hooked us up so we could get 33s stock, you might be obligated

 

Those vent shades are nice. Do you know if they sell them for us folks who just have two operable windows?

 

Thank you,
I wasn't sure what it was going to look like. I like it!!

 

Tire size?

 

The only in-channel option I see for an access cab is dark tinted and not low-profile, but you could always just not use the back visors. The matte black visors really look nice, I would just cringe and throw out the back ones. It's a one-time purchase.

 

265/70/17