Wyoming B.S. Thread

I do. Sort of. I loaned it to a family friend, but I don't think he is using it anymore so could always do that.

Hopefully I'll be able to at least get new holes drilled.

 

Here's on bolt that I didn't catch. Other side was doing this too.



And here's the other side with no bolts anymore.




Store here didn't have any sleeves that would work. Barely had two more bolts. Thought about doing 1/4 20 but realized the nut would be too big for the rail extrusion

 

Probably too late, but you might be able to make a sleeve out of some larger nuts or washers that you slip onto the bolt, if you can find the right combo to fit. Obviously then, you need a much larger washer for the top of the whole sandwich.

 

Not worth it. Couldn't find sleeves anyways. Easy enough to drill new holes. Have 3 bolts per rail with large washers on top and bottom. There is a small gap on the bottom between the rail and floor.

 

1jz 2nd gen.

https://www.instagram.com/p/BoKNlPIAiUZ/?utm_source=ig_share_sheet&igshid=1umoni6e5acqp

 

Nice. 2jz would be better..

 

Probably. Are they harder and more expensive to get? Or is the 1jz easier to run from a management system standpoint?

 

Nah 2jz is way more expensive. High dollar motor there.

 

Idk I'd rock a 1j. Haltech even though theyre expensive and a 1j

 

I wouldn't, not in the truck anyways. Torque curve sucks compared to the 3.0l. Still be a fun screamer that's for sure.

 

Sweet. Be perfect on 5.29's!

 

Thats true!

You going to finally regear then

 

Not anytime soon... Been a street queen since moving back to WI gonna try to get Jen in a new car and keep the fiesta for me to drive and park the taco for most of the time.

 

take the fiesta and swap for an RS..she'll never know...

 

Haha yeeeeeah

 

It'll be fiiinnneeee

 

So..this happened last night. Heard it happen. Not far from my house really. Pretty crazy



https://billingsgazette.com/news/lo...cle_bf8ddf19-f778-5800-b4f5-f56e41ff95d1.html

 

Some local drunk probably figured if it could smash a penny flat an engine block should be no problem

 

yeah who knows. First time I had traffic out here though to get to work lol Am curious what caused it though. Glad it was just coal and not oil or something toxic or explosive.

 

Looks like quite a mess. Will probably cause the coal trains to get backed up down here.