Norcal Spotted and BS Thread

Why not go with ARB dual compressor. That way just in case you get front locker or want to add 5 gallon tank and can run tools as well

 

@2015whitetaco ive got a stock hitch for ya. Come by and pick it up.

 

Lol not a baller

 

Shitty picture from the sun rising, but spotted this tacoma this morning

 

good to know. I missed that, didn't see it on the product page.

 

the CKMA12, single pump, is $250 on Amazon

Look into the Viair Onboard systems. I have the constant heavy duty on my truck IIRC, they also have a medium duty. Amazon has them for $200-250 depending which model you look for. I think the heavy duty is $275, the medium is $190-ish

$460 VIAIR Constant Duty OBA Onboard Air System with 450C Air Compressor & 2.5 Gallon Tank, 12V Offroad Compressor, 150 PSI, up to 37" Tires

https://www.amazon.com/VIAIR-Constant-Duty-Onboard-System/dp/B000YC42RG

Don't need to spend a lot. There's a Pepboys budget one that dozens of guys recommend, called the 'Master Flow'

 

Have a stock chrome rear bumper for ya if ya want it, has small dent on one side

Free.

 

Can someone put this in layman terms

 

Ftfy

 

a compressor can only push back against psi in the tire it's filling for so long. see chart. at 0psi in a tire, it can do 2.3 cubic ft per minute. as you add PSI (left column) it gets hard for the compressor to push against said PSI. see chart, at 30-40 psi (a lot of what our tire's are filled to) the pump can only transfer 1.8 to 1.7 CFM (cubic feet per minute). You'll notice this in real life by noticing the tire gets up to 20psi real quick, but quickly takes longer and longer to fill up as more force (PSI) is pushing against the pump.

This curve, if you will, is why we pay attention to duty cycle. lots of pumps are 33%, the better ones are 100% meaning they can run longer without overheating.

 

Ohhhhhh what'cha getting?

 

Found this on the ARB Compressor. The Viair is a 1.86 cfm @ 30PSI VS the ARB single at 2.34 cfm @ 29 PSI...

 

Sounds like you figured it out.

 

2 hours too late lol the ebay sale is over

 

bummer, sucks dude!. I tried to help, posted those CFMs earlier today to help you out.

 

No biggie brotha! Really its only 30 bucks off lol

I still can get a 400P for a good price but I wanted to hardwire my OBA so the ARB was looking more promising.

 

I have the 400P cradled to Expedition Essentials bedside compressor mount.

The 400p should be fine for the 90% of what youre planning on doing with it..which saves you almost 100% moneywise.

 

How much did you pay for the mount though

 

Like $120 lol.... its compatible with the ARB dual but why spend that much?

 

https://expeditionessentials.com/co...edside-compressor-mount?variant=1708368658441

Ill install it for you if you want. Buy the Viar Air Source relocation kit so we can drill a hold in the back by license plate.

Also need to extend the power cable to reach the engine bay.