TTC ☆ OFFICIAL

Can’t do my job because people don’t know how to park. F250 went through the gap with inches, I’m a foot wider.

 

Got to have those mirrors ALL the way out.

 

I bet your rig can make space and rearrange some vehicles. The Road is yours.

 

Anybody done the Aluminum Seat Spacers , For Seat Mod
https://www.tacomaworld.com/threads/fs-aluminum-seat-spacers-for-seat-mod.563843/

 

No, but I turned my own on my lathe out of nylon. 1 inch rear, and about 7/8th on the front. The front seat rail has a locating stud right behind the mounting bolt. 7/8th is about as high as you can go in the front before the stud alignment is off to much for bolt threads. Now the Taco seat matches the 4Runner seat or at least very close.

 

Did you feel it was more comfortable?

 

ABSOLUTELY

 

10-4 Thanks

 

Start with a bunch of washers first to figure out what height front and rear is best for you.

 

That’s so true...morning y’all

 

Have a good day yall. I'm gunna try not to smash someone's skull in. Cheers

 

TTC Curb Stomping Party!

 

Because end of week.

 

That is a classic...

 

All food an brews provided

 

Morning Matt

 

I do

Basically you wanna lay out a line of where you want to cut on the flare. Take it off and make the cuts, use a dremel and go slow. You can cover any cut imperfections with that edge trim.. The metal fender just needs to be cut underneath the flare holes to re-attach it, but those cuts will be covered by the flare The most work in my opinion is if your wanting to keep the oem liner......

I'm down for whatever!

 

Morning Mike Staying warm?