FS: 2nd Gen Angel Eyes.

Used them for awhile, I don't really like the look personally. They've been sitting in a box in my garage for awhile, and if you look at the bottom one on the right hand corner it looks like there was some moisture on the inside of it that dried up, you'll have to clean that part up.




I have all the bulbs and everything. I made a comment on how i liked a set that was on my friends car, so he bought me a set. I never really liked how the looked on my truck so I ran them for awhile and then took them off (I told him I got HIDs and the ballast wouldn't fit... )

Because of that I'm asking $80 shipped or $60 local. I live about 20 minutes outside of Orlando, but I work out there so it would be extremely easy to meet up in the area.

 

Are these plug and play? IE can I just pull my stock lights and replace with these?

 

Yes, they have little clip on splice connectors that clip on to your existing wiring for the LEDs, and the other connectors plug right up.

 

If you want to see what they look like in the truck I have them on mine. When and if you install them on your rig DO NOT use the connectors supplied with the lights I had nothing but problems with the connectors. I suggest you use T-Tap connect they're easier to work with and they look better and you might want to ditch the 6 LEDs on the verticals and replace them with LEDs from http://www.oznium.com/ here is the link for the LEDs
http://www.oznium.com/194 they come as a pair and they are worth the price. If you go this route you will have to cut out the resistor and splice into the parking lights as with the other accent lights but remember to keep the sockets and the joints together that way you only have 1 pos and 1 ground for the vertical LEDs. Here is my truck with the light installed.

 

I strongly suggest to whom ever buys these to re-seal the shit outta them because the ones I had leaked like hell...go ape shit with a tube of clear silicone

Bump for a good price

 

I am interested for sure. I live in Canada, though. So I don't know how much shipping would be, and I can pay you with paypal. Let me know if this is doable.

 

very interested!!

 

My left head light has moisture in the bottom part when it dries where do you put the silcone.

 

how is the light output on these comparied to the stock headlights? i had a set on my old duramax and they didnt compair to the stock lights

 

Good deal.

 

I love mine. I think that the output is increased not to mention you can get it exactly where you want it a lot easier.

 

The moisture did NOT get in to them when I had them on my truck. The moisture got in there when they were sitting, open, in a box in my garage.

 

do you still have these?? can you run hids with them

 

no u cant!!! as stated in the post!!! look down a couple posts

 

are these still up for grabs? if so pm me

 

did you get a new truck?

 

around the 3 LED bulbs...they fall out after time because they don't twist lock...they just push in...thats where a lot of moisture can get in. Just seal all around the little LEDs and they should be good

I owned a set of these and the little leds feel out and mud got inside the housing itself!!

 

SOLD!!! im buying them local Saturday!!! haha....deal closed

 

SOLD!!! i bought these today....i just cant figure out how to take them apart to clean the inside of the one w/ moisture dry up...any help will be greatly appreciated!!!