What Have You Done To Your 3rd Gen Today?

I had this same concern so I used just a dot of gorilla glue on the peg only.



I also figured that I’d be removing them at some point to color match the cement grey. That and paint the silver base of the T and the A to black. I also didn’t like the backing tape on the A which covered the hole and didn’t extend all the way down the legs, so I removed some and added some.



EDIT: looking at my own picture of the back of the grill, I now see why the tape doesn’t extend all the way down the legs of the A.

 

Nope! Taliking about model glue, the stuff we used to use putting model cars and airplanes and such together with as kids.

 

Rigids SAE fogs went in before vacation.

 

Decals by @CBoy808 and blacked out turn signals by @mesojdm !!

 

Traded my ray10’s for f5’s.

 

TRD grille and ‘19 skid plate (new removable red poly insert)

 

Like "Testors Model Cement"? I think that stuff was actually cyanoacrylate glue, no? I could be wrong.

 

Amazon, however they do not stay stuck on. The texture on the interior for these trucks makes nothing stick to them

For now i just tied the cable into a small loop and might run it through the dash at some point.

 

Use plastic epoxy, that double sided tape with worthless

Ok, I see you did and were replying to the op

 

Trying to get caught up on all those things I wanted to do over the summer before the snow flies.

Finally got my Redline hood struts installed today.

To those that recommended this thing from Harbor Freight...

 

Cyanoacrylate is “super glue”. Model cement has (had) toluene and other stuff in it that actually melts and fuses the polystyrene plastic that models are made of. The good stuff from the early days is what people would sniff to get high on. I don’t think it’s made the same way anymore. Not sure.

 

Still waiting on my struts to come in.

 

Do yourself a favor and get one of those long-handled HF riveters (if you don't already have something similar). Check for sales and discount coupons, of course. I think I paid < $15

 

It’s like Christmas!

 

Installed my KBVoodoo AluMax rack and posted a thread today
https://www.tacomaworld.com/threads...dback-cover-photo-heavy.570861/#post-18829217

 

Thanks. Yep, now it's coming back to me.

 

I parked next to a PRO while shopping. It’s like a brotha from anotha motha. Red headed step child.

 

• Fox 2.5" Extended Coilover
• Fox 2.0 rears
• OME/ARB Dakar medium leafs (leaves?)
• SPC UCAs
• Discoverer STT Pro 285-75-16 on stock Off-Road wheels

I still have some fine tuning to do and haven't yet cranked up the front - coilovers are set as they came. But only very, very minor rub that a heat gun will likely cure.

Big thanks to @HeadStrong Off-Road

 

Used it for work today. Cruising the pipeline right-of-way in southern Saskatchewan with a colleague from the US of A. A little snow overnight, some muddy conditions, and some super soft sandy spots. I hate it that I have to be gentle with the accelerator and can't open it up, lest I be out of work.

Got the Cali Raised antenna mount installed and am using a quick-connector for my safety flag. So far the bracket is holding up to the flag grabbing the wind at 65mph if I have it up on the highway. Thanks to Cali for a great product that solved a major irritation for me.

 

I wish I would have had that advice