Inferno Thread

Great look, thanks for posting!

 

Nice truck! I assume the bumper ends are plastic dip. If so, did you disassemble the bumper or just mask off everything else? Thanks.

 

Truck looks great!! I'm hoping to get a similar look on my new inferno, but black out the badging. Mind sharing lift, tire, and wheel brand and size?

 

Thanks.

I will black out badges as well, eventually. Got other stuff in the works first. Lol.

It is lifted 2” on 6112/5160s with HS 3 leaf progressive AAL. 285/70/17 Nitto Ridge Grapplers. SCS F5s 17x9 -38 offset.

** Be prepared to trim, cut, hammer and chop like a mofo to make these fit/clear. **

Good luck!

 

Did you shoot with a wide angle lens? Those look huge even though we have the same tires.

Also, I didn't need to do any trimming aside from my mudflap, but I do have SPC UCAs.

 

No. Just a regular iphone pic.

I’m almost positive it is the wheels. Not sure about your wheels specs, but mine have a very aggressive offset/backspacing, which is causing all rubbing issues, while looking absolutely killer. Wouldn’t change a thing.

What are the specs on your wheels? Post a profile pic of your truck to compare.

 

• 
  
• Size: 17x9
• Offset: -12mm

 

-12 is nice but -38 is mo’ better!

 

Just added the pic, wonder if it's the angle too. You look lower to the ground in yours.

 

That being said I have this bad boy waiting for some time for me to install it.

 

Looks good.

Maybe the phone?

What are you using to take a pic?

I’ll take a higher up pic in a bit. About to do some more work on it. Lol

 

Nice! About to mod it more as well!

 

Removed bed decals and dealer installed pin striping today. Anyone have a recommendation for product to remove the adhesive? I used goo gone. Worked okay, but can still see the outline of the stickers. Maybe I'm just not scrubbing hard enough, but worried I'll damage the paint! Thanks.

 

I used Goo Gone, a microfiber, and a ton of elbow grease. Needs to be a hot day also. Good luck man. I soaped/waxed afterward as well.

 

I just used soapy water. I think I used one of those abrasives (goo gone, goof off, etc.) whatever was good for the clear coat, but it still is noticeable in direct sunlight for me so I just choose to ignore it

 

I used GooGone on the first side took forever and just made a mess. On the second side I peeled the sticker off and used the sticky side to pat the glue and just rolled it with my fingers. took half the time.

 

Black. It has the factory linex texture.