What Have You Done To Your 2nd Gen Tacoma Today?

this set up is legit! where did you get the insert?

 

Thats an awesome place for the air tank! Never seen it there before

 

Got a link?

And where did you find that panel that everything is mounted on?

 

Nice mod! Were you able to take a step-by-step pics on how you ran the wires and connections?

 

How do ya like that flowmaster 50? I’ve got the same right now.

That looks super clean!!!

 

So far, in the 48 hours (approximate) that I have had it, I like it. Better than the stock exhaust that has some bad rust (almost all the way through the can). Glad I replaced it.

 

Busy weekend again. Fluid filmed the whole truck. Rotated the tires. Cleaned and checked the spare while it was down before soaking that.

Only managed to use a little over half a gallon. Was hoping to use more, but never used the spray gun before (used aerosol cans last year) so I'm not sure what's typical of that. How much do you guys usually use for full coating?

Enjoyed some decent foliage on the drive too, despite how it looks in the picture..

 

Installed a complete Toytech boss lift kit with reservoirs. 2 day project, but got it done. Going in for alignment today.

 

Can you explain a little more or show how you tapped into the wire by the fuse panel? This seems like a fairly easy mod. Thanks!

Probable consider these as my light source.

https://www.superbrightleds.com/mor...ff-road-led-rock-light-replacement/3030/6104/

 

Finally got the cargo lights wired up and attached to the brackets @GHOST SHIP made for me about a month ago.


Exactly what I wanted. But the ditch lights I used are too intense, so I'll probably replace them with something less bright. Any recommendations?

Also adjusted the front Bilsteins up to the top ring, but don't have any pictures of that.

 

I call mine Betty, and I can honestly say that I've never given any of my toys Dude names. LoL But Whatever tickles your fancy.

 

LoL yea Ron's Fancy... But I am not really surprised by it, I see a lot stranger things on the daily.

 

Maybe go to an amber light? Little easier on the eyes...

 

Amber would be a good idea.

 

See if whoever makes that light has a lense, would be a cheap route to start.

 

Those are Cali-Raised Ditch Lights. I think I want to use them as ditch lights, and replace them with lower intensity lights for the bed.

 

Clean upgrade

TOTAL CHAOS
WWW.CHAOSFAB.COM

 

Not a bad idea, and I don’t think Cali makes a lense anyway, they have their designated 18W 3x2 amber pods.

 

Could do some Rigid diffused lens lights and that should be better light dispersion and intensity