Gun compartment

Sorry no photos, but just buy the Hornady rapidsafe and bracketeer from Amazon, drill a couple holes in the rapidsafe for the connection to the bracketeer, bolt the bracketeer to the seat mounts and you're done. You just have to decide how far out to mount the safe depending on where you typically adjust your seat.

 

I would prefer a push button combo or something similar to open it. I wouldn’t want to have to hunt for a key

 

Anyone store a full size pistol in the Lock’er down?

Trying to determine if this is the right route for me to go.

 

I like the burner where I can get to it quickly lol. Simple magnet. You can get them on Amazon for like $13
EDIT: not my picture, I just received mine in the mail so I haven't gotten around to mounting.

 

cocked and locked,the only way to fly

 

You might as well have a hammer otherwise. Lol

 

+1 on the lockerdown

 

+2 on lockerdown. Not cheap, but piece of mind is priceless. Bigger guns fit in there akwardly, a piece of fabric to keep them from scraping sides might be necessary.

 

I needed something secure and quickly accessible, so I have one of these:
https://tacticalgear.com/gunvault-m...346404&utm_content=gunvault#/26284/653/1&dl=b

I drilled 2 holes in the back and zip tied it to the front of my driver side seat cushion. It's completely out of the way when driving, and not noticeable by others. But, I can get a pistol out quickly and without looking.

I also ran a steel cable with some slack for theft protection as well.

 

Repeal the NFA and the Hughes amendment first.

 

Pistol, condiments, and an extra holster if need to carry outside the truck.

Note the problem with concealed carry in the console: wires and straws can get in the way. Neatness counts.

 

another vehicle?

 

Console vault...

 

Here is what I did.

 

Sorry for you! Moved out of that place when everything started going downhill. Southern states SOO much better in all respects.

 

Super clean! Nice.

 

For those using magnets to side-mount pistols to their console vaults - are you drilling through the vault and mounting the magnet with hardware? Or just sticking it to the interior of the vault via magnetism or adhesive?

 

3m tape

 

Wow! You got one with the exact same combo as mine, how neat