3rd Gen Owners with King Coilovers

Those are 2.5s. I think he meant 3” lift

 

Anyone have a resi mount they can take a picture of. My hose is rubbing my upper arm a little eating away at it.

 

anyone have a pelfrey bumper and running king's? does the reservoir mount interfere with the pelfrey bumper support? i have icon brackets. will those work?

 

Thanks! Who makes those mouts?

 

Came with my kings

 

do you recall how much preload you had with your icons and how much you have with kings? were you running same # spring? switching from icons to kings too but trying to take a guess at the preload and set it off the truck

 

Has anyone sent there coil overs in for a re-valve? I heard of people getting there kings revalved at places that were not affiliated with King.

 

So the king 3.0s are going to be a little different than the 2.5s. Less thread/lift. I measured off about 1.1” of thread showing on my king 3.0s. The king 3.0s also come with a 550 spring. Just throw them on the truck with maybe 1/2 inch and adjust it. It’s pretty easy to adjust them on the truck.

 

@hirod My buddy @Tacomania is rocking Kings with his Pelfreybilt Bumper. His bumper was already mounted up, but later Installed the bumper supports. Just remove the reservoir brackets and install the bumper supports under the reservoir mounts using the longer bolts from king.

 

like @mcharfauros noted it does not, ill try and get pics for you and upload. i dont think icons would be any different unless their mounts are different, which i wouldnt think they would be. I just saw that @Toki is a perfect example, mine are the same...

 

thanks. picture worth thousand words. I'll give that a try. icon mounts are sheetmetal so they can squeeze in between the frame and brace.

 

Kings!

 

installed mine this weekend. used same spring compressed length measurement to set the springs in the king's (i used icon springs because they're black) and got the ride height same as before. no adjustments needed. reused the icon resevoir holder in front because i have a project in mind for the king's. surprised i could tell the difference between the kings and icons.

 

Hey guys need some help for suspension.. I’m going to get some King 2.5s front and rear + UCA’s and extended brake lines. Should I get a leaf pack as well like OME or Deaver? I’m wanting about a 2in lift all around

I off-road a good bit and don’t tow or haul anything in the bed besides my dirt bike every so often

Also anything else I should add suspension wise?

 

Both the ome Dakar’s will give 2.75” of lift. The HD’s support 660 lbs additional weight, the mediums do not. But you can take a leaf out of the HD’s to make it a medium, and they are not much more. Deavers are going to cost more, but the j66 only provide 1.5” of lift. The u402s will give you 3” and start at 300-400 lbs additional weight with options 700+lbs.

I’d replace the oem bumpstops and flip the ubolts too

 

Just ordered some 2.5 with reservoir without adjusters and total chaos arms....hopefully I don't regret not getting the adjusters

 

Awesome thank you, 2.75” is a bit more than I’m looking for, I might go with the Deavers for 1.5”

 

Medium EL095R pack on 3rd gen is 2 inches from stock with no load. 2.75 if your 2nd gen.