1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Best organizers? Center console, glove box, behind and under back seat? New Predator side steps for DC $263 Small tint job, seeking advice Show your rear chase lights PSA: Ear Protection definitely required Fender plastic pitting

3D Tacoma Parts Thread

Discussion in '3rd Gen. Tacomas (2016-2023)' started by smith.p.sean, Sep 29, 2018.

Page 3 of 15
  1. Oct 6, 2018 at 10:45 AM
    #41
    smith.p.sean

    #41
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    :) yea what he said!!

    This 06 ex500 will be my next major project in a few months. Likely next april-may.

    [​IMG]
    [​IMG]
     
    smith.p.sean, Oct 6, 2018
    #41
  2. Oct 6, 2018 at 3:20 PM
    #42
    johnny1019

    #42
    johnny1019 Well-Known Member

    Joined:
    May 6, 2011
    Member:
    #56214
    Messages:
    55
    Gender:
    Male
    Arizona
    Vehicle:
    MGM 2017 4x4 TRD OR DCSB
    Yes. This. My part is printed out of ABS. While not exactly the same as the injection molded ABS parts under the hood, I wouldn't expect 3D printed ABS parts to have issues under the hood.
     
    johnny1019, Oct 6, 2018
    #42
  3. Oct 6, 2018 at 8:23 PM
    #43
    smith.p.sean

    #43
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    First post and my signature have been updated with the first two things. I have a remix I am making now for the driver cubby as well as two plates for some fishing rods I mounted in the rear. Stay tuned for more fun!
     
    smith.p.sean, Oct 6, 2018
    #43
  4. Oct 7, 2018 at 5:33 PM
    #44
    smith.p.sean

    #44
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    These plates are for a fishing rod holder project I did. I originally cut the plates out of plywood but that obviously didn't hold up to the elements so I tossed these together pretty quickly. I printed these solid 90% infill at 0.2 step rate on slow setting with a DaVinci AIO 1.0

    The nut cutout fits a 1/4-20 thread stainless steel nut perfectly snug with slight sanding / dremel.


    I didnt bother with finishing these pieces as they are going in the bed. I did spray them black however... need to buy more black ABS. Orange is fun but makes for some extra work!

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Drying now, so ill have a finished pic tomorrow.
     
    smith.p.sean, Oct 7, 2018
    #44
    Sandy94 and Atl_taco_ like this.
  5. Oct 7, 2018 at 5:45 PM
    #45
    Mrzw70

    #45
    Mrzw70 Well-Known Member

    Joined:
    May 4, 2017
    Member:
    #218211
    Messages:
    59
    Gender:
    Male
    First Name:
    Mitchel
    Vehicle:
    2017 Tacoma TRD double cab long bed
    Running boards, roof rack, bed extender, plasti-dipped grill.
    Very cool. I'd like to have a printer myself. Don't know if I could justify the cost though.
     
    Mrzw70, Oct 7, 2018
    #45
  6. Oct 10, 2018 at 8:49 PM
    #46
    JimmyRigged88

    #46
    JimmyRigged88 Well-Known Member

    Joined:
    Feb 28, 2018
    Member:
    #245842
    Messages:
    301
    Gender:
    Male
    WA
    Vehicle:
    2020 JLUR
    JimmyRigged88, Oct 10, 2018
    #46
    gman2431, TacoBowl, Manfred and 2 others like this.
  7. Oct 10, 2018 at 8:57 PM
    #47
    treimche

    #47
    treimche Well-Known Member

    Joined:
    Dec 2, 2016
    Member:
    #203883
    Messages:
    789
    Gender:
    Male
    Fargo, ND
    treimche, Oct 10, 2018
    #47
  8. Oct 10, 2018 at 9:33 PM
    #48
    JimmyRigged88

    #48
    JimmyRigged88 Well-Known Member

    Joined:
    Feb 28, 2018
    Member:
    #245842
    Messages:
    301
    Gender:
    Male
    WA
    Vehicle:
    2020 JLUR
    Thanks! Let me know how they work out, I haven't printed those ones yet.
     
    JimmyRigged88, Oct 10, 2018
    #48
  9. Oct 12, 2018 at 6:50 PM
    #49
    smith.p.sean

    #49
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    Just added a remixed Driver Cubby 3 Switch Panel!
    [​IMG]
    [​IMG]
    [​IMG]


    And a teaser pic... Tacoma Letter Inserts. Ill have these wrapped up tonight, quick and easy @LivinOnEdge

    [​IMG]
     
    Last edited: Oct 12, 2018
    smith.p.sean, Oct 12, 2018
    #49
    jerzsubbie and ranzulu like this.
  10. Oct 12, 2018 at 7:48 PM
    #50
    smith.p.sean

    #50
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    Glove Box Letter Inserts completed and can be found in the first post and my sig. They are printing now for me and Ill have to check fitment but im pretty sure they are spot on. Right now they stick out about 2mm. I might drop that down to 1mm once they are done.

    [​IMG]

    EDIT : Stupid cartridge is out on the Davinci. I gotta add more filament to it and reset it. :( Prolly wont print this now til tomorrow. If someone wants to run it and let me if anything needs to be adjusted it would be appreciated.

    @LivinOnEdge
     
    Last edited: Oct 12, 2018
    smith.p.sean, Oct 12, 2018
    #50
    gman2431, Manfred and LivinOnEdge like this.
  11. Oct 12, 2018 at 8:06 PM
    #51
    jdmstuff

    #51
    jdmstuff Well-Known Member

    Joined:
    May 23, 2018
    Member:
    #254364
    Messages:
    512
    Gender:
    Male
    First Name:
    Derrick
    Torrance, CA and Las Vegas, NV
    Vehicle:
    '18 TRD OR DCSB AT, '08 TRD Sport DCSB AT, '03 TRD 3.4l 4x4 MT Supercharged
    Thanks for the switch panel!
     
    jdmstuff, Oct 12, 2018
    #51
    smith.p.sean[OP] likes this.
  12. Oct 12, 2018 at 8:15 PM
    #52
    HolyReptar

    #52
    HolyReptar Well-Known Member

    Joined:
    Jan 23, 2012
    Member:
    #71259
    Messages:
    1,901
    Gender:
    Male
    First Name:
    Bry
    Thousand Oaks
    Vehicle:
    17 TRD Offroad 4x4
    Some Bolt ones here and there
    Is this for the models with the sunroofs?
     
    HolyReptar, Oct 12, 2018
    #52
  13. Oct 12, 2018 at 8:50 PM
    #53
    smith.p.sean

    #53
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male

    I personally have a trd offroad dclb with no sunroof. I also had 2 switches in that row. One in the black panel to the left, and one in the center panel. This is for that center panel to change it from a single switch to a dual. At some point this weekend I will start on the right hand side which was also a blank panel for me. If you link a picture of your overhead console I can tell you if it will fit or not.
     
    smith.p.sean, Oct 12, 2018
    #53
    Sleevez likes this.
  14. Oct 12, 2018 at 8:56 PM
    #54
    HolyReptar

    #54
    HolyReptar Well-Known Member

    Joined:
    Jan 23, 2012
    Member:
    #71259
    Messages:
    1,901
    Gender:
    Male
    First Name:
    Bry
    Thousand Oaks
    Vehicle:
    17 TRD Offroad 4x4
    Some Bolt ones here and there
    33BF476F-284A-452A-8BC1-2841921B003C.jpg
     
    HolyReptar, Oct 12, 2018
    #54
  15. Oct 12, 2018 at 8:57 PM
    #55
    smith.p.sean

    #55
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    Yup, it would take the place of the single switch in the middle and give you two holes for switches instead of just the rear locker.

    I know @mesojdm sells similar items and they can be found in his threads or send him a message, he is swamped pulling together his business though so I don't know what all he has in stock for you.
     
    Last edited: Oct 12, 2018
    smith.p.sean, Oct 12, 2018
    #55
  16. Oct 12, 2018 at 10:33 PM
    #56
    smith.p.sean

    #56
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    Aight, letters printed because, hey who sleeps anyways.

    First pass was a bust. I screwed up the center of the A, the M got all wonky on me so gotta rework the M completely. The beveled edges fit the the holes perfectly while the flat back is ever so slightly to big on all the letters. Stay tuned for version 2. I have pulled the current version so no one prints any useless letters.
     
    smith.p.sean, Oct 12, 2018
    #56
  17. Oct 15, 2018 at 1:45 AM
    #57
    Mrzw70

    #57
    Mrzw70 Well-Known Member

    Joined:
    May 4, 2017
    Member:
    #218211
    Messages:
    59
    Gender:
    Male
    First Name:
    Mitchel
    Vehicle:
    2017 Tacoma TRD double cab long bed
    Running boards, roof rack, bed extender, plasti-dipped grill.
    I think the extra switch panel idea is great, it's nice to use wasted space for something useful.
     
    Mrzw70, Oct 15, 2018
    #57
  18. Oct 15, 2018 at 7:10 AM
    #58
    ratcityrain

    #58
    ratcityrain Well-Known Member

    Joined:
    Jun 3, 2015
    Member:
    #156667
    Messages:
    1,374
    Gender:
    Male
    Seattle, WA
    Vehicle:
    2017 Double Cab Off Road
    OEM Running boards |oemassive headlights | winjet tail lights | led lighting | hid headlight & fogs | oem tri-fold Bed cover | Custom dual JL Audio 10tw3-d4 sub box and custom amp rack | black off road wheels | painted oem grille | jbl door speakers |
    This is what I want when mesojdm gets caught up. I like to fill in that blank space with switches, one of them being for the rear window.
     
    ratcityrain, Oct 15, 2018
    #58
  19. Oct 19, 2018 at 6:35 PM
    #59
    smith.p.sean

    #59
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    In the first post are links to all of the items we have discussed so far. Johnny share his file with me and I posted it up.
     
    smith.p.sean, Oct 19, 2018
    #59
  20. Oct 19, 2018 at 6:40 PM
    #60
    smith.p.sean

    #60
    smith.p.sean [OP] Well-Known Member

    Joined:
    Mar 21, 2017
    Member:
    #213985
    Messages:
    181
    Gender:
    Male
    What kind of file are you looking for? You know you can edit STL files yea?
     
    smith.p.sean, Oct 19, 2018
    #60
Page 3 of 15

Products Discussed in

Rexka 30pcs Door Garnish Moulding Retainer Clip Compatible with Toyota Lexus 67771-58010 Tundra Tacoma Sequoia RAV4 Land Cruiser Highlander C-HR Yaris Scion xD
$7.99
To Top