What have you done to your Tacoma today? 1st Gen Edition

7mgte engine... that filter sucks to get out. Barely fits past the stuff for the trurbo

 

Hmm. This is an interesting idea.. I have like 8 sets of 2nd gen leaf springs I was going to scrap. Maybe I’ll experiment with the 02s old leafs

 

Bilsteins and the O2 sensor

 

I replaced mine a few years ago... sawzall, chisel, and a bfh. Cut it in a few pieces then hammer and chisel it out. Put a greasable bolt back in there before everything seizes back up.

 

Back to the topic of "What have you done to your tacoma today?"

I tested out traction with BFG AT KO2's on a the steepest county road in the country - washboard dirt road that had a layer of ice under 6" of fresh powder. This Subaru didn't make it. After I took the picture, I ended up sliding back 20 feet completely out of control. I then put the chains on my truck, locked the rear diff and had no problems.

 

Just measured on compression its 2inches shy of the OEM bump stops, on the drop its 13.75. from top spring to bottom of frame, in front of bump stop. I have a feeling my shocks are limiting my down travel though.* edit -still have 3 inches of shock travel! $$

The leafs are different thickness in the packs. I have 3-1/4 and 2-3/8 is what I used. All dog eared and OEM shims between each leaf, fresh paint and never seize applied each layer. Later in the month after I'm satisfied 100% I will take them apart and drill each end for the oem teflon pads along with fresh spring keepers bushings and t100 shackles.

 

Stupid question: Are the RearDiff Lock and Clutch bypass switches supposed to light up with the headlight switch on...?

 

Only 4x4 V8 ive seen was a custom oil pan and notched crossmember. Exhaust was routed up to the front by the radiator.

The oil pan CX makes is only for the prerunner.

Thats not bad. That would be the most I'd pay.

 

I feel like somethings wrong with it personally.

 

I've seen them for 3k..

 

Oh I’m sure, they just don’t have many pictures, and they don’t State what the title is (which I’m sure you don’t care about as long as the frames straight).

Maybe it’s fine, I dunno. I’ll keep watching

 

yeah true. Lots of info lacking in the post. Not about to go get it anyways. I'll play a long game to get one for a price I want.

 

You should sas whatever’s left when you’re done.

Cause you need another project.

 

fuck it. Might as well.

 

Cause 3.75 Tacoma’s is better than 2.75 Tacoma’s

 

Someday it'll be a whole number...maybe

 

I’m hoping to break my whole number into fractions soooner than later haha.

 

Installed RTMR and Breaker. Dual battery set up is pretty much complete. Now to start buying lights and shit to connect to it.

 

Looks awesome
If you need anymore help let me know
TepuiFest was awesome wish you coulda been there

 

Dude, I totally wish I could have been there. We didn't even hunt this weekend. Jen's Grandma's funeral was pretty rough for Jen. So we just stayed home and dinked around the house.