What Have You Done To Your 3rd Gen Today?

Thanks!

 

Filled it with some Bmw washer fluid, now my blinkers don’t work

 

Is that a WR?

 

Purchased the plugs from Toyota, pins, wires, and loom I got from my buddies. I've read on here that you can purchase the pins from Toyota already crimped to flying leads, but at an insane amount. I'm a bit OCD, and had to have the wires match the existing harness. Here's a pic of the part numbers.

 

Nice looking mall crawler!

 

Installed 5100s, OME 886, and Headstrong progressive AAL. All with a floor jack, jack stands, and regular hand tools.

 

Loving that front bumper

 

@koditten actually made it for me. It's quite possible you could fit a softopper under it, but space on my rails is becoming limited.
Goal was to be able to use this rack at the same time as my tonneau, but dimensions didn't work out; if you pursue this route, I would definitely find some way to bolt the bracket to both the rails and the rack for mounting to the truck.

Weight limit wise is TBD, but the builder seemed pretty confident in it in everything except for an RTT. If that's your need, though, I'm sure some additional supports could be added.

Here's a video on it:

 

What was the cost?

 

I designed it to allow a ST under it. I actually over sized it. I did not want the ST touching any if the iron when it flexes/ripples in the wind. I own a ST, so I knew what to look for.

The only drawback is you can not callapse the ST. The rack is not tall enough.

 

It's not old, it's now YOURS!

 

Yeah, WR250X.

 

Nice match with the truck, I have the Trail Blazers plates, I swapped from the 2017 Corolla I traded in

 

I have the plates from the 2017 Corolla I traded in and I’m waiting to put the plates on ‘till the las day of the dmv permit expires and is on October 25th, I like it with out plates fells newer without

 

I was either gonna do the blazer plates or these, but I guess June was the last month to get the pacific wonderland plates so I had to! I wish they still made the Oregon trail ones.

 

I would love to see your writeup on the whole process please

 

I second this. I would jump on the Oregon trail one if they still offered it. I have crater lake on my car and I will be getting the blazer one come 2019 when my tags are up

 

yes I would also like a write up to this .... or maybe you and your friends get together and start selling these.

 

Looks good! Can you share the product link for the phone holder to the right of the steering wheel? TIA!

 

That's exactly what I want. Same color and everything. If you don't mind me asking, where did you purchase and cost?. Can't wait to see them installed please post pics.