What Have You Done To Your 3rd Gen Today?

Didn’t find it necessary to use the drain hoses. In conjunction with the OEM bed mat any water that does get in is negligible. For the most part any water that gets in is through the tailgate from the "undercarriage wash" at the laser wash I patronize. There are also two very small gaps on each siderail by the bulkhead behind the cab. A small piece of adhesive backed gasket left over from the installation remedies that issue.

 

Damn, I've done some serious digging for a product like this (also have a Rexing S1, but looks like it will work). You sir get 1000 internet points today!

https://www.shapeways.com/product/P...unt-best-way?optionId=63619415&li=marketplace

 

I like the way you think!

 

I did the same thing this morning. But I got the rexing v1LG. It uses a different mounting system than the v1p so I was not able to use the shapeways mount. But, I took part of a gopro extension, cut part off and epoxied it to the rexing mount. Mine doesnt sit as close to the windshield as yours does with the shapeways mount

But, its best place to mount a camera on these trucks and it works.

 

My worst vice next to spending money on my Taco! Damn Irish lineage!!

If you haven't tried Sam Adams Octoberfest I encourage you to try it.
Super smooth Marzden and it blows all other Octoberfests I've tried out of the water. Time is almost up to get it, it's getting hard to find!
Applebee's still has it on tap. A great dinner beer.
Get the "Brutus"!

 

Thanks for the heads up!

 

How do they handle so far? Truck looks nice.

 

Joined today and over 40 messages. I'd say "Welcome to TW" but you've made yourself at home.

 

Plasti Dipped my wheels today. Weather is too nice not to do something and buying brand new wheels is out of the question lol.

Any tips on how I can plasti dip the chrome "TACOMA" lettering?

 

Wheels look great!

 

I cut down to one 2 beers a night, what more could you want?

 

Night out. At home...........

 

Welcome to tw get your wallet out and ready!!!

 

tons of videos on youtube of people doing badges... just mask off around it and spray it til you like it, let it dry and peel the excess away

 

I have the same setup minus UCA’s waiting for me to get home to install....

 

Do you have a link for adapter?

 

https://www.shapeways.com/marketplace?type=product&q=dashcam

 

Zing! Done! Painted my bolt head black.

 

@C4 Fabrication Bumper went on last night!


And does anyone know of an option instead of a fairlead or a fairlead license plate type cover that I could fill the space for the winch with?? I don’t have plans for a winch any time soon and am looking for a decent option. Might just end up cutting the size down and drilling holes in a nice aluminum license plate or something, but I’m surprised nothing like that already exists...