Built For the Internet...By the Internet Mall Crawler (AR15xAR10's Build Thread)

@Mobtown Offroad @EatSleepTacos @68dave

Any word on our 4runner skidplate Joe?

 

6 then a 12

 

Finally finished. 10/10 would not fucking recommend if your truck is older than 5 years or over 50k miles

 

good job gettin them done tho man

 

Which gen?

 

Aluminum 5th gen

 

I think the design is all done and ready to be purchased. Unless you already did and are just waiting for it to be completed.

 

Standby,

Order was placed: 9/3/2018 #8067

 

why did you replace the cab mounts? im about to break 150k, and on the second frame and cant see anything wrong with them

 

They replaced them when your frame was replaced

 

not as far as i know, the only thing replaced with the new frame is the brake hardlines and front LCA's, plus some hardware in select spots

 

Makes no sense why they wouldn’t.

Mine were WTFO and creaking. I’ll take pics later

 

This job fucking sucked, but its done:

 

Nice job! Now Fluid Film the hell outta that new one!!!!!!!!!

 

Air chisel couldn’t reach in there so i used an electric hammer drill chisel to get the old one off @EatSleepTacos

 

What the hell did you need the chisel for?

 

To get his nut off

 

Old one would not come off.

 

Also did the clock spring job.

Cruise control works. Airbag light is not on. All is well.

Junk Chinese clockspring/spiral cable that i DID NOT USE:


$200 OEM one that I installed today:


Old one that i removed (no longer working):

 

Both old and new together:


New one installed:


Clock spring job went well. But the intermediate shaft job left my wheel one spline off, this is straight down the road: