What Have You Done To Your 2nd Gen Tacoma Today?

Peach to be exact.

 

thanks man

 

Picked up some beadlocks! 20x9.5”, 0mm offset.

Clearing wheel wells for 35s soon and then buying nice tires for them.





My buddy keeps trying to sell me on 37s. Not trying to relocate body mounts though lol.

 

Couldn't agree more! That's why its the law to have reflective lights, not ones covered up and only visible when the lights are turned on. So other people can see you, even if a bulb burns out.....




Took Betty and the family down to the Big Blue river. This Valley is where I learned to Ride, Race, and shoot guns.



Had a Big Fire too.

 

And not to mention that you will probably have to do some tubbing to get them to fit with 0 offset.

 

I can’t deny it will be work, but honestly it won’t be too terrible. Too much negative offset can really magnify the steering angle and make it even more difficult to clear tires. We checked clearance on my friend’s 4Runner and it all looked okay. I’m glad that these wheels are so wide so that I don’t have to run so much offset or even spacers to fit 12.5” wides.

 

Posted her for sale Incase anyone in The south east is looking.

 

my dealership will do everything they can to avoid looking at my truck, even if its still under warranty. hopefully your issues get addressed, any small rattle drive me nuts so something as a shake would not put me at ease

 

This was my first thought but not being able to put my hands and eyes on it made me

 

Added work lights on both sides!

 

1. 1/4 inch Aluminum 8.5x47 inch
2. 1/4 inch Aluminum 10.5x15 inch

These slide into the cross bars tracks nicely like this but was nervous of vibrations .
Etch primer
Bed liner. I prefer Rustoleom Professional over Duplicolor
Then I cut some clear vinyl (3M clear Bra) about 1/2 inch in width about 10 inch’s long

I used the clear vinyl over the edge and bottom to increase thickness and total width

With the vinyl on. You actually need a mallet or deadblow hammer to get them to fit in the cross bar tracks. This makes it tight as a ducks ass.

So far. It’s mint. No vibes or whistles .. going to make some more

They are probably not as light as the genuine ones. But they work out less than half the cost and strong

 

That truck is beautiful. Wouldn't have think that color would be nice but the matte finish with the black combo

 

Ha ha thanks brother!

 

Just got my truck back from the shop:
New gears front and back(4:30)
Rear locker(TruTrac)
Air bags in the rear to help with the weight of a travel trailer.

 

Just got a call from the dealership. So far everything on the list is fine and nothing is wrong.

They did say it needs new brakes and rotors, the brakes are low.

Could that be why?

 

Yes my little gas saver commuter car did shake very bad when the rotors got bad... Cant speak to the tacoma though..

 

Brakes being low, no- but warped rotors possibly. Is it worse with braking?

 

Got my wheels back from blasting. Now the real work begins.

 

Now that I think about it, depending on the speed, yeah, sometimes yeah.

 

Picked up some steel. @EddyRRT is the MAN!