1st Gen Lunchtable Thread - General Discussion

But all the ig overlanders do that

 

Where else would their camrea man sleep?

 

Are those the other 2 dudes @Crow_of_judgement was talking about?
Driver, camrea man, drone pilot, gopro guy

 

This is very true. With heavy 33s and a loaded bed (RTT and gear), going up the Grapevine with my truck I have to hit it with speed to maintain 60-65mph going up in 4th gear....forget about 5th unless I want to encounter ping city. She's screaming in 4th at that speed and RPMs, and that's with the 6cyl and supercharger...Can't imagine attempting that while pulling a heavy load let alone with a 4 banger and auto

 

I got worse mate lol

 

You referring to the bear? Or the guy?

 

Since you guys are so worried about me cause I been awol. @Sperrunner knows what happened. But my gf's mom passed away and I been spending time with her.

 

comments are correct, won't help me offroad.

 

Thats too bad man, my condolences, going through the early stages of that with my Girlfriend, her dad doesn't have long, so I feel ya

 

Stabbed myself in the gum with a tortilla chip.

 

Better then the roof of your mouth

 

Thanks, same to you as well

 

Im also regearing to 4.88s (3.4 Auto)
I used Core West and they have a deal that if you buy the Yukon gear set the install kit comes with the gear set for no additional charge.
Here is what I ended up getting:

YUKON Toyota V6 4.88 Ring and Pinion:
https://coreswest.com/yukon-toyota-v6-8-4-88-ratio-ring-pinion-set-larger-pinion-and-flange/
YUKON Toyota 7.5" Reverse 4.88 Ring and Pinion:
https://coreswest.com/yukon-toyota-7-5-reverse-rotation-in-4-88-ratio-ring-pinion-set/

 

Oh I burned all the feeling out of that area a few weeks back with a slice of pizza that was a bit too fresh.

 

What one you wanna be?

 

Egg

 

Is that what you identify as?

 

Yup, my truck was a pig going up the grape vine with 33s, stock gearing, & I'm auto. I've got 4.88 now but haven't climbed the grape vine again yet. I'm curious now.

Thing is Tyler has 32s. Gearing is about the same for 4cyl & 6cyl, just 4cyl has less power of course. I believe he has 4.30 now which is not too far off from 4.56 which should be good for his truck. If he was manual he'd probably be ok with 4.30 as manual can get away with one step higher gear ratio. 4.88 is a bit too low if he's going to stick with 32s unless he doesn't care about cruising fwy speeds with high rpm. IMO not worth spending all that money to go from 4.30 to 4.56.

 

Don't question my identity

 

Im not. Just making sure so i don’t confuse your identity